ek_mo
Jordan 331
- Joined
- Jan 26, 2009
- Messages
- 826
The upper ball joint boots have gone which caused my car to fail it's M.O.T. Other suspension bushes/parts are looking quite worn out too so I've decided it's time to replace/upgrade a few bits.
My Jordan is driven daily and it's lowered on Tein coilovers. I have the following energy suspension bushes which I bought a while ago:
Front control arm bushing set.
Front Shock bushing set.
Front 26mm ARB bushes.
Rear 13mm ARB bushes
Rear trailing arm bushes.
Steering rack bushes.
Ball joint and tie rod boots.
Front and rear coil spring isolators
These are stiff as f*** so I'm only planning on using the front and back arb bushes unless I'm better off buying OEM D bushes? Should I consider using any of the other bushes from the set? I don't mind a slightly stiff ride but nothing too harsh.
Other parts I want to buy:
Hardrace front Camber Arms - HARDRACE FRONT UPPER CAMBER KIT w/Hardened Rubber Honda CIVIC EK 6204 | eBay
Rear LCA's ( still unsure of which to get )
Blueprint front and back droplinks - Simauto
And other parts I'm considering changing:
Camber arms - To be able to adjust rear camber if I ever have to
Toe arms - For the sake of replacing the bushes
I also have this Whiteline rear camber kit gathering dust.
KCA371 Whiteline Caster/Camber Adjustment Kit - Control Arm for 96-00 Honda Civic at Andy's Auto Sport
I have no idea on how this even fits tbh. I'd fit it if it's a good kit and if I knew how it worked
All I'm after is a decent road set up, this is what I have in mind at the moment and I need you guys to point me in the right direction.
My Jordan is driven daily and it's lowered on Tein coilovers. I have the following energy suspension bushes which I bought a while ago:
Front control arm bushing set.
Front Shock bushing set.
Front 26mm ARB bushes.
Rear 13mm ARB bushes
Rear trailing arm bushes.
Steering rack bushes.
Ball joint and tie rod boots.
Front and rear coil spring isolators
These are stiff as f*** so I'm only planning on using the front and back arb bushes unless I'm better off buying OEM D bushes? Should I consider using any of the other bushes from the set? I don't mind a slightly stiff ride but nothing too harsh.
Other parts I want to buy:
Hardrace front Camber Arms - HARDRACE FRONT UPPER CAMBER KIT w/Hardened Rubber Honda CIVIC EK 6204 | eBay
Rear LCA's ( still unsure of which to get )
Blueprint front and back droplinks - Simauto
And other parts I'm considering changing:
Camber arms - To be able to adjust rear camber if I ever have to
Toe arms - For the sake of replacing the bushes
I also have this Whiteline rear camber kit gathering dust.
KCA371 Whiteline Caster/Camber Adjustment Kit - Control Arm for 96-00 Honda Civic at Andy's Auto Sport
I have no idea on how this even fits tbh. I'd fit it if it's a good kit and if I knew how it worked
All I'm after is a decent road set up, this is what I have in mind at the moment and I need you guys to point me in the right direction.