Hi guys I'm wanting to do a k swap into an ej9 I'm knowledgable of Hondas I've had 5 in 2 years 2 ej9s ek4 Jordan an ep2 and an ep3 I've done the b16 , b18 swaps and would love to do this legendary swap!!! I'll have both cars next to each other (ej9 and ep3) my questions are apart from mounts and driveshafts (ep3 shafts with b series outers) can I fabricate the exhaust mani, wiring loom shifter assembly mounting ect I'm a qualified mechanic and keen fabricator so look forward to this! Another question is if I have the ecu, key and ignition barrel ect from the ep3 can I merge that into the current ej9 wiring or do I need to buy a special conversion harness custom ecu and a magician to map it all? The way I see it if I match all the wires I can to the dash loom of the ej9 and the rest just to the ecu from the bay loom it should run just like it did in the ep3? Thanks for your time guys! I look forward to hearing from you!