Right i suppose we should post this in order of whats happened, photos are uploaded to photobucket now so here goes.
prepping the bay, as you guys could see from the initial photos it was covered in rust.
then we went about etch priming it.
also under sealed the front end.
got the subframe seam welded then painted.
also painted and Poly bushed the front lower arms.
we then removed all the glass from the car.
then as per standard with this shell, it needed more welding due to rust,
also removed and welded up the aerial hole.
after some body workings we layed down some primer.
then colour went down and got us to where this thread is at.
More to come.
Nuno.