JDP's boosted 9


JDP

Member
Joined
Dec 26, 2010
Messages
440
They were the limiting factor on how much power it made. They are running hard but then they should be. AFR's are spot on through the rev range so ive no concern :)
 


4dvti

New Member
Joined
Jan 4, 2008
Messages
15
awesome car and awesome figures! can't wait to use my Pfab log mani now lol
 




Rory

New Member
Joined
Mar 21, 2010
Messages
48
Did you follow ther link? RC state that your injectors will NOT support that power... What pressure do you run?
And no you dont want injectors running flat out, thats how things go boom ;)
If the AFR's are ok the dyno must be a power number happy machine..

They were the limiting factor on how much power it made. They are running hard but then they should be. AFR's are spot on through the rev range so ive no concern :)
 


JDP

Member
Joined
Dec 26, 2010
Messages
440
I trust my tuner, with over 250 boosted hondas under his belt and the only faliure being a headgasket ill go with his opinion :) thanks for the concern though
 


JDP

Member
Joined
Dec 26, 2010
Messages
440
Been mad busy with work and forgot to update this. Had a fresh driveshaft after a clciking cv joint arose, had a beauty of a deal on a straight swap on my recaros recliners for these....

seats.jpg


knocked some subframes up to mount them too but will probably make them fixed so that i can sit them lower in the car.
Also these should arrive in a couple of weeks too...

IMG_0440.jpg


Need to get her on a diet then and remove the interior trim etc and then get some sticky rubber. Any suggestions or experience on here with maxsport rb5's???
 



Maffy

mmmm EK9
Joined
Aug 8, 2011
Messages
651
Love this!! If I was going to turbo my 9 I would probablly go down the exact same route and try and make some money back from my b18cR
 


JDP

Member
Joined
Dec 26, 2010
Messages
440
Well progress has been slow due to work but managed to get some new bits fitted tonight, get my brakes and camber arms on this weekend hopefully, but its starting to look something like ive wanted it too :D

phat.jpg


phat2.jpg
 

Last edited:


021-bennettt

Member
Joined
May 5, 2009
Messages
544
Looks like a nice few bits going onto this, are you getting wider wheels for the overfenders?
 


JDP

Member
Joined
Dec 26, 2010
Messages
440
One the wheels are sat on proper tyres instead of the gay stretched **** its on at moment it they will fit better. Not really bothered on looks tho tbh, its all function over form here!!!! ;)

BOOM brakes on :D

brakes.jpg
 

Last edited:


JDP

Member
Joined
Dec 26, 2010
Messages
440
Cheers man :)
Had a track night last thursday @ Cadwell and other than a 900bhp R35, nothing could catch it! Once ive dialed in the chassis and its on the A048's its going to be blistering fast around the 'Mini-Ring' :D
 


loveland

Member
Joined
Oct 15, 2008
Messages
839
Cheers man :)
Had a track night last thursday @ Cadwell and other than a 900bhp R35, nothing could catch it! Once ive dialed in the chassis and its on the A048's its going to be blistering fast around the 'Mini-Ring' :D

My brother got these tyres on his daihatsu gtti. Mega tyres!
 



jarvis483

New Member
Joined
Dec 10, 2010
Messages
193
your motor looks like a right hoot mate. props to you.
what arches are you using there mate? the rear arches on my civic are rotten and im thinking about a set of arches like yourself in order to cover them?

cheers.
 


t3gav

Active Member
Joined
Nov 10, 2011
Messages
740
Any more vids :) ? Could you do me a favour and measure how far the turbo sits out from the block please?
 


Jubair

Member
Joined
Aug 12, 2011
Messages
533
Car looks savage! How much did the turbo setup and installation set you back?
 


Top