JDM goodies. Everything must go.


A

ADRi

Member
Joined
Jul 13, 2008
Messages
465
Hi.

So after selling the ek, i need to get rid of all parts i got left in the storage room.

Prices do not include shipping, but i will try to give cheaper quotes... that means i will pay part of the shipping to make it more affordable.



Original red Bride Zeta II carbon kevlar bucket seat ... $OLD











When i bought it three years ago i gave it a good cleaning and it looked perfect. It has no wear anywhere except on the right bolster due to the old owner. Being red dirt is more visible than black so once you clean it it will look almost brand new. Has some minor scratches on the back (already came like that) so condition would be 8.5/10. Must say all seat clothes can be machine washed with just taking out the spring that holds the clothing.
Does not come with rails, but could add the LHD ek Bride rails i used on my ek.

Original red reclinable Bride Euro II ... $800








I'm the first and only owner. Bought it brand new 5 years ago. First was used as driver then i bought the Zeta II and this was installed as co-driver so was used 2 or 3 times a year. Again, because of being red, dirt is easily seen but it can be cleaned (has two zips on the back to take off all the clothing)
White dirt on the back bolster is due to my storage room wall. It's not paint, it's gypsum so can be cleaned without too much effort.
Does not come with rails, but could add the co-driver ek Bride rails i used on my ek.

Original Bride LHD seat rail for ek ... $200


Bought brand new. Looks like that. No scratches, no colour fade. All stickers intact.
Has three positions: normal, low & super low. Will include original screws.

Original Bride RHD seat rail for ek ... $200


Bought brand new. Looks like that. No scratches, no colour fade. All stickers intact.
Will include original screws.

BNIB Seibon carbon trunk for ek ... $OLD







DSC_0335_zps79e76a15.jpg Photo by ADRi_B16 | Photobucket
DSC_0336_zps67d80d77.jpg Photo by ADRi_B16 | Photobucket
DSC_0337_zps778bbad8.jpg Photo by ADRi_B16 | Photobucket
DSC_0338_zps559f1d29.jpg Photo by ADRi_B16 | Photobucket
Just opened box to take proper pics. Never installed on any car neither test fited.
Tried to take as much pics as possible because ligh reflects and looks like it's scratched but it isn't!!
Made for 96-00 3 door hatches

Original Ek9 door panels ... $250
DSC_0341_zpsdc39f2ad.jpg Photo by ADRi_B16 | Photobucket
DSC_0342_zps0f86e50c.jpg Photo by ADRi_B16 | Photobucket
Altough not pictured, both come complete with all plastics and window buttons. Right one has a small cigaret burn. Nothing major.

Original Honda roof rack for EP ... $300
DSC_0343_zps0c10bf5b.jpg Photo by ADRi_B16 | Photobucket
DSC_0344_zps39cd3cb9.jpg Photo by ADRi_B16 | Photobucket
Bought brand new on Honda dealer. Used once. Made of aluminium. Comes complete with key and aftermarket soft rubber protections to protect even more the roof of the car.

Denso o2 sensor for B16A2 ... $80
DSC_0346_zpsce305c21.jpg Photo by ADRi_B16 | Photobucket
DSC_0348_zps751e6da8.jpg Photo by ADRi_B16 | Photobucket
DSC_0350_zps9abe8e49.jpg Photo by ADRi_B16 | Photobucket
Bought brand new because the old one was not reading properly. Ran with it around 5.000 miles then sold the B and went K :giggity:

Rywire ground kit ... $OLD
DSC_0351_zps325ca3f9.jpg Photo by ADRi_B16 | Photobucket
DSC_0352_zps35101a7e.jpg Photo by ADRi_B16 | Photobucket
DSC_0353_zpsa33592a7.jpg Photo by ADRi_B16 | Photobucket
DSC_0354_zpse3dac557.jpg Photo by ADRi_B16 | Photobucket
Bought brand new a year after i installed the K. Works perfect. No wear anywhere. Could do with a clean.

ARP head studs for B16 ... $OLD
DSC_0355_zps37944bff.jpg Photo by ADRi_B16 | Photobucket
DSC_0356_zps8baa6af7.jpg Photo by ADRi_B16 | Photobucket
Bought brand new. Installed on my rebuilt B16A2 for 8.000 miles before i blew out the engine due to oil problems.

Greddy auto timer ... $OLD
DSC_0357_zps42dd181f.jpg Photo by ADRi_B16 | Photobucket
DSC_0359_zpsd6d7b412.jpg Photo by ADRi_B16 | Photobucket
DSC02693.jpg Photo by ADRi_B16 | Photobucket
Bought brand new. Lots of functions. Can go in any car.
Instruction manual: http://www.greddy.com/upload/file/FATT.pdf

BNIN Quaife 3.25 steering kit + OEM manual steering rack for ek ... $OLD
DSC_0372_zps35617dd0.jpg Photo by ADRi_B16 | Photobucket
DSC_0364_zps49117130.jpg Photo by ADRi_B16 | Photobucket
DSC_0366_zps324af877.jpg Photo by ADRi_B16 | Photobucket
DSC_0367_zpsd00b8bd1.jpg Photo by ADRi_B16 | Photobucket
DSC_0368_zpsc82374bf.jpg Photo by ADRi_B16 | Photobucket
Bought this Quaife quick rack and pinion kit to use with the manual steering rack but ended selling the car so here it goes... My loss is your gain.
Tie ends should be replaced.

BNIB original Rays Volk TE37 blue stickers ... $80 (x2)
DSC_0373_zps6f2cfdb9.jpg Photo by ADRi_B16 | Photobucket
DSC_0374_zpsb6bb7748.jpg Photo by ADRi_B16 | Photobucket
Bought these to throw on my powdercoated set of TE37 but forgot i had them and now i don't have rims for these.

Tein hood dampers for ek ... $OLD
DSC_0379_zpsfa138420.jpg Photo by ADRi_B16 | Photobucket
DSC_0381_zpsca0eae37.jpg Photo by ADRi_B16 | Photobucket
Again, bought these and never installed them. They came as they are.

BNIB original Mugen pedals ... $150
DSC_0383_zps10b8b088.jpg Photo by ADRi_B16 | Photobucket
DSC_0384_zps932141c8.jpg Photo by ADRi_B16 | Photobucket
DSC_0385_zps07822720.jpg Photo by ADRi_B16 | Photobucket
Never installed. Comes with everything needed.


Don't have pictures of the other parts so that's all atm. Will update as soon as i take pics.


All parts are located in Spain.
 
Last edited:
I'll take the Tein hood dampers pal, PM me best price posted to UK with your paypal :)
 
Best fitment you can find. Like oem.

Seibon is a reputable company. I'm sure you'll get better fitment than any ebay trunk you can find :)
 
Bride Zeta II is a very comfortable and good bucket, I own one with FRP shell.
The ones made of carbon/kevlar like this one are very rare. :)
 
Yes, in fact, i've never seen another one like mine.

I love it, but a bucket on an ep3 is not comfortable because of the driving position... that's why i'm getting rid of it.
 
You must log in or register to reply here.
Back
Top