itr vtec problem

[itrsmyth]

hey men were do i start my m8 integra jdm dc2 96 spec will not vtec rite when she hit 6000rpm she will lift the sound but will not pull at all. this wat ive done

new plugs
a set of new leads
a new oil pump
new oil filler
check the timing marks
use an other ecu
new 02 sec
new fuel filter
got an other dizzy
has this ever happen any one else.

 

[jfatboy]

check how tight your cam retaining clamp bolts are torqued....might fix it.


Also, write properly, you aren't on your mobile phone.

 

[elchunk]

clean your IVAC, could be a build up of gunk in there.

 

[elchunk]

also the mesh in the vtec solenoid could be clogged up.

 

[itrsmyth]

check how tight your cam retaining clamp bolts are torqued....might fix it.


Also, write properly, you aren't on your mobile phone.

why would dat hold the power back? why this happen to you pal?

 

[itrsmyth]

also the mesh in the vtec solenoid could be clogged up.

ive check all dat pal ive an other car i can take parts off.

 

[elchunk]

well only other things i can think of is that your car still thinks its cold so its not engaging the higher cams, oil not up to pressure or faulty sensors?

 

[itrsmyth]

well only other things i can think of is that your car still thinks its cold so its not engaging the higher cams, oil not up to pressure or faulty sensors?

is that the one in the head pall? but why is she still giving the sound an nose diving around 7000rpm