inditcators not working but harzards are


jp_ek4ferio

jp_ek4ferio

Member
Joined
Jun 11, 2013
Messages
176
well lads i noticed today that my indicators wernt working but my hazards were. i checked the fuse, checked relay and also replaced it just in case, i also replaced my stalks, anyone any suggestions ?
 
iirc, the hazards use a different relay, but the indicators and hazards share the same earth point/bolt. (Not 100% sure, but perhaps 85% sure). So having said that, the earth should be ok - however, it would be a easy place to start and confirm.

Have you checked the hazard switch connection? Just before I built mine I accidentally left it unplugged and my indicators didn't work.
 
Ok I was thinking that but presumed they used the same relay I will look for another one. Yea the connection was plugged in. Do you know where the relay might be there's three relays beside the rad so il look there ?
 
Has the plug into the fuse box worked loose? If I remember correctly it's the green plug on the right hand side of the dash fuse box.
 
il have a look, really dunno what the problem is cant think of any other reason
 
there is a fuse box under the steering column, probably a fuse or relay for them in there.
 
You must log in or register to reply here.
Back
Top