Got B16A2 EK4 Turbo

[davidviii]

Hello people, just a quick question, I have the EK4 4door B16A2 turbo, but Im having the problem that the clutch oil is evaporating I think since I havent see any leak on the master or slave.

if its possible that the heat of the turbo is causing this problem? and if it does what are the better solutions to solve it

regards

 

[EK9turbo]

i)make sure the turbo downpipe or wastegate dumptupe is not touching the slave cylinder
ii)clutch and or brake fluid has a very high boiling poing so it is most likely leaking and not evaporating
iii)make sure its not leaked in your cabin, when the master cylinder leaks in the cabin and the paint on the firewall below the brake pedal will be soft and melted from the fluid.

You must carefully identify the leak. No ammount of guesswork on a forum will tell you what it is for definite. Good luck

 

[blinx9900]

you have a leak.