gearbox problems...!


G

goolash786

beasted ek9
Joined
May 9, 2007
Messages
87
hi i was just wondering if anybody knew this, i had the bearings redun in the gearbox like 1 month ago in my ek9 and i seem to be having problems allready. when im driving fast and shift down from 4th to 3rd it wont go in 3rd its like there is something blocking it or something bt when i blip the throttle it goes in....? i donty know wats wrong and its rili enoying does anybody know?
 
is there enough transmission fluid? what type of fluid was used?

is there a leak on the clutch master/slave cylinder?

is there enough fluid in the clutch master/slave?

if all of the above is proper, then it's likely something to do with the install, or your clutch is worn and needs replacement.
 
master/slave often get over looked, these are wear parts and need to be changed as part as regular maintenance, if your car came from japan and your gonna do the clutch might as well do these too.
 
... Low gearbox oil.
during my friends gearbox rebuild, due to low gearbox oil, gears started to pop out when put in gear.. after more driving, gears got stuck into gear and had problems putting it into gear. It turned out to be low gearbox oil. Insufficient moisture circulating the gearbox which caused the top parts inside the box to expand
 
just wonder how come low gear box oil would lead to poping out from gears.
and hard to shift
 
You must log in or register to reply here.
Back
Top