Gear shifter rebuild

[Biscuit]

Morning all,

One of the final things to do on my EK9 is refresh the shifter bearings and bits.

I've done the linkage bushes, but understand there are some little plastic bits to swap to get rid of the side to side wobble?

 

[Steve M]

There's a plastic cage part that goes round the ball end of the gearstick where it meets the linkage. I replaced it on my car a few years ago and it firmed everything up a lot! Only place I've seen them is Honda, but I'm sure it was only about a tenner

 

[Leej8]

Here is the part number
SEAT, CHANGE LEVER BALL 54110-SH3-003

 

[robthedoc]

tegiwa sell them

 

[Luger]

Looking for one of these but cant seem to find it on the Tegiwa site though

 

[Biscuit]

@Tegiwa Imports can you help?

 

[Leej8]

Ten dollars? If tegiwa can't help http://www.hondapartsnow.com/genuine/honda~seat~change~lever~ball~54110-SH3-003.html

 

[Luger]

Ten dollars? If tegiwa can't help http://www.hondapartsnow.com/genuine/honda~seat~change~lever~ball~54110-SH3-003.html

As with most US sellers....they dont ship to Europe

 

[Leej8]

You will pick it up handy enough anyways.