si8pny
Well-Known Member
- Joined
- Sep 21, 2010
- Messages
- 1,436
FUJITSUBO RM-01A Exhaust for civic ek4/9
been modified to fit a k swap In good condition slight scrape to the mid box and the rear tip has the smallest of dents not noticeable once fitted.
New these are £800 -£1,000 that's if you can even find them for the ek civic.
Due to the scrapes and the front part of the b pipe being modified for a k swap £450 ono collected.
Will not post due to size and risk of getting damaged.
Located South Wales Newport NP20
Some blurb below about it. Pipe size 60.5mm Tail size 89mm The Fujitsubo RM-01A exhaust was originally developed for race cars. It's a lightweight muffler with a highly efficient exhaust flow. The design and use of light weight raw materials makes the Fujitsubo RM-01A exhaust much lighter than OEM exhaust systems. The Fujitsubo RM-01A exhaust also features lightweight bracket and flange. This lightweight construction greatly enhances efficiency while maintaining its sporty intensity. The hangers of the Fujitsubo RM-01A exhaust also include a base plate which maximizes durability for the exhaust system. The Fujitsubo RM-01A exhaust pipe and canister is manufactured with strong 1.0mm / 1.2mm SUS304 stainless steel. By optimizing the thickness of the exhaust piping and canister, the Fujitsubo maximizes the RM-01A exhaust race inspired feel. This combination of light weight design and strength provide both efficiency and durability.
www.facebook.com
been modified to fit a k swap In good condition slight scrape to the mid box and the rear tip has the smallest of dents not noticeable once fitted.
New these are £800 -£1,000 that's if you can even find them for the ek civic.
Due to the scrapes and the front part of the b pipe being modified for a k swap £450 ono collected.
Will not post due to size and risk of getting damaged.
Located South Wales Newport NP20
Some blurb below about it. Pipe size 60.5mm Tail size 89mm The Fujitsubo RM-01A exhaust was originally developed for race cars. It's a lightweight muffler with a highly efficient exhaust flow. The design and use of light weight raw materials makes the Fujitsubo RM-01A exhaust much lighter than OEM exhaust systems. The Fujitsubo RM-01A exhaust also features lightweight bracket and flange. This lightweight construction greatly enhances efficiency while maintaining its sporty intensity. The hangers of the Fujitsubo RM-01A exhaust also include a base plate which maximizes durability for the exhaust system. The Fujitsubo RM-01A exhaust pipe and canister is manufactured with strong 1.0mm / 1.2mm SUS304 stainless steel. By optimizing the thickness of the exhaust piping and canister, the Fujitsubo maximizes the RM-01A exhaust race inspired feel. This combination of light weight design and strength provide both efficiency and durability.
Log into Facebook
Log into Facebook to start sharing and connecting with your friends, family, and people you know.
www.facebook.com
