egshane
B18C ek9
- Joined
- Jun 7, 2009
- Messages
- 2,248
Finally got my VSM EK9 back !
- Thread starter dhdavectr
- Start date
- Joined
- Feb 1, 2009
- Messages
- 1,845
ahh thought so, i missed it gutted
cars looking good thought dude!
Cheers bud, I'm trying to find somewhere to do a batch of winglets but not having much luck.
- Joined
- Feb 1, 2009
- Messages
- 1,845
where did you get your rocker cover done? Its mint!
Cheers.
I did it myself, got a small grill/oven at work so could only do half at a time then turn it round and do the other side. Still need to do the lettering once the paint has set properly.
- Joined
- Feb 1, 2009
- Messages
- 1,845
nice job on the cover. are you gonna sand the honda and vtec sign? looks nicer the way it is atm with the new plug cover anyway haha
yeah fancied getting the writing silver to match the plug cover
- Joined
- Feb 1, 2009
- Messages
- 1,845
few small upgrades, my LHF caliper was binding pretty bad. Got a used one off a mate, but when I went to fit it I found out the bleed nipple was seized. When I got it out, it also took the threads with it.
Went round to H-tune and got a re-conditioned one
Also got some new pads/discs for the front and new rear pads. Old disc didn't want to come off lol
Also did my valve clearances, exhaust side was out a bit. Some Skunk2 low profile bolts, Vtec solenoid cover, new dizzy O ring and a Blox cam plug. Blox was a waste of time as you can barely see it.
Finally got a steering wheel quick release fitted too, bit fiddly getting it 100% straight to my ocd level
Ideal time to wash my wheel in the sink, the color of the water was disgusting !
Went round to H-tune and got a re-conditioned one
Also got some new pads/discs for the front and new rear pads. Old disc didn't want to come off lol
Also did my valve clearances, exhaust side was out a bit. Some Skunk2 low profile bolts, Vtec solenoid cover, new dizzy O ring and a Blox cam plug. Blox was a waste of time as you can barely see it.
Finally got a steering wheel quick release fitted too, bit fiddly getting it 100% straight to my ocd level
Ideal time to wash my wheel in the sink, the color of the water was disgusting !
- Joined
- Feb 1, 2009
- Messages
- 1,845
Treated myself to a pressure washer and some snow foam. Got cracking on with the nice weather today
Finished ready for japfest
Excuse the finger over lense incident
Wash the bike as well
Think I'll take some detailing spray and back to black down with me.
Finished ready for japfest
Excuse the finger over lense incident
Wash the bike as well
Think I'll take some detailing spray and back to black down with me.
- Joined
- Feb 1, 2009
- Messages
- 1,845
Ha ha, yeah it was badly rusted at the back with a big lip so I decided to smash it to bits.
- Joined
- Feb 1, 2009
- Messages
- 1,845
Cheers, don't think anything else got damaged. I hope........ Ha ha
- Joined
- Jan 11, 2011
- Messages
- 449
Massively underrated colour I think...looks awesome
- Joined
- Feb 1, 2009
- Messages
- 1,845
cheers mate, it's rare having an ek9 in vsm. Just not so rare a color for civics
- Joined
- Feb 1, 2009
- Messages
- 1,845
Went out for some photos on the A702 Dalveen pass recently with Dan EK4 and my mate who runs Ankana Racing to get some pics.
Here is a top one of mine
A link to his account with some nice s2000 pics
Flickr: Stage Two Imaging's Photostream
Here is a top one of mine
A link to his account with some nice s2000 pics
Flickr: Stage Two Imaging's Photostream
).gif ":)) :))")