Few questions!!!

[Colin89]

1, If I get my b16b can I run it on my standard loom and ecu or do I need a conversion harness?
2,Will a standard honda 4.78 final drive fit my s21 lsd gearbox?
I am in the middle of purchasing parts for my new build and need answers for this... Any help apprecieated.... By the way I have a 94 jdm eg9 or saloon sir!

 

[RagingAngel]

1) need OBD1 to OBD2A or 2B (depending on year of 16B) for best performance. 16A is not recommended

2) no.

 

[Colin89]

Thanks for the help! The engine is from a 00 ek9...

 

[RagingAngel]

Then you need OBD1 to OBD2B harness.

OBD1 to OBD2 Conversion Harnesses

or look on eBay for a seller with high feedback.

 

[crazy eyes]

wount the fd fit with some minor modifications

 

[Colin89]

I think you need the integra lsd to go with it!!! could be wrong though!!!

 

[RagingAngel]

correct. Need the ITR/CTR LSD before the final drive will work.

 

[Colin89]

Thanks for the link racingangel....... So I need the harness and the 9 ecu!! I also need the ek9 engine mounts to fit the engine dont i?

 

[Vtec6000]

I think you need EG mounts for the swap EK type r ones are different

 

[Colin89]

Ahright wel then will my existing sir ones do?

 

[Vtec6000]

AFAIK your sir ones will do the trick, just bolt them off your b16a and bolt them back on to the b16b, ill double check tomorrow for you to be sure.

 

[RagingAngel]

AFAIK your sir ones will do the trick, just bolt them off your b16a and bolt them back on to the b16b,

correct.

 

[Colin89]

Cheers guys! Going to look at the engine thursday so hopefully ill get it and start work...