[Ek9]HEL brake lines kit question


N

NicoEK4

Member
Joined
Nov 10, 2011
Messages
269
Hello all,

I have a very dumb question concerning a HEL brake lines kit. I have 2 hoses strictly identical but on two others the part that bolts to caliper is different...

I have an ek4 with front and rear ek9 drivetrains but when I got it there was already stainless lines. Both rear are identical. Both front are identical.

Where is going each hose ?

DSC_0103.jpg
 
They should be different lengths Iirc?
Does the length match the front or the rear?
 
As far as I can remember my hal lines , the two with more of a bend go on front and two on the rear are straight?
Looks like your missing one rear and have one Extra front?
 
All lines are equal length.

I will send an e-mail to tegiwa customer service.
 
Ive just had goodridge fitted im pretty sure they were all equal length, could be wrong though. Mechanic said he had no problems fitting them to my ek9.
 
I'm sure my hel lines are longer for the front as well. As for the bend it looks like the kit isn't right. Shoot them an email and Im sure they will sort you out.
 
Mine were longer on the front.
They had different ends also.
 
matt from tegiwa is managing this with HEL.

I will let you know what's right but first point is in the ek9 kit it is normal that everything is the same length.
 
NicoEK4 said:
matt from tegiwa is managing this with HEL.

I will let you know what's right but first point is in the ek9 kit it is normal that everything is the same length.
Click to expand...
This is interesting as it would confirm my goodridge being equal length.
 
You must log in or register to reply here.
Back
Top