Ek9 bushes different to ej9?


Celiaej9

Celiaej9

Loveeeeeee VTEC
Joined
Jul 6, 2012
Messages
174
Hey guys... I hope this isn't a repost but I have searched high and low for the answer and can't seem to see anything.
Anyway I've got an ej9 that I'm building and before I put a faster engine in it one of the things I'm doing is a full rebush.
Are ek9 bushes different/better to ej9 ones? Will they fit an ej9? And were can I get a full set from? I've heard there mugen? But not 100% that that's true.
I've got ek9 front and rear arbs.
Thank you in advance.
 
If your looking to replace all the bushes then a hardrace bush set May suit you.

They are harder than original bushes and last longer than poly bushes.

Or if your on a smaller budget then you could use ADL blueprint bushes available from motor factors or eBay etc.
 
b16 mini said:
If your looking to replace all the bushes then a hardrace bush set May suit you.

They are harder than original bushes and last longer than poly bushes.

Or if your on a smaller budget then you could use ADL blueprint bushes available from motor factors or eBay etc.
Click to expand...

Thank you for that....
I'm not on a budget.
I have researched this but I'm worried that they will be to hard for daily road use. :/
 
They will be fine in my opinion, lots of people use them on road cars.
I bought a set for my first ek9 but never got round to fitting them then sold it all.
 
Another vote for hardrace stuff here, rebuilt my EJ9 using their stuff and its fine for a daily.
 
Why don't you go through the EK9 and EJ9 parts catalogs and look out for any differences in the part numbers?

I did this for an EG6 vs DC2 and found out some were indeed different.
 
I had hard race on my old Vti. Recommend them aswell. Wasn't to hard for daily use. Perfect kit :)
 
You must log in or register to reply here.
Back
Top