dan22h
Member
- Joined
- Feb 14, 2009
- Messages
- 492
Change in plans, was considering wether or not to brake the car but have decided to start a long term k20 project.
The parts below will be still be getting sold as they are no longer needed
Reputation: http://www.ek9.org/forum/reputation-center/29887-dan22h.html
Paypal?: yes (buyer pays fee's) or cash on collection
Location: parts can be collected from Dunfermline Fife (scotland), or from Telford (england) i can also arange to meet in between or near by.
b18c block (bare) with oil pump, water pump and sump with full crank girdle bearing caps etc
£60
b18c type r crankshaft. spun a bearing and has marked the crank. i have been told by a local machine shop that it can be reground £20 (please note this is not the crank from my stroker kit for sale, that crank is fine.
The damaged journal is shown on the middle journal in this pic
Coilovers; (REDUCED)
Genuine Spoon Fully adjustable coilovers. have covered approx 15k miles and have slight corosion but are still in good working order. please note this picture was taken a couple months ago before they were refitted. i will get up to date pics for anyone interested £350
Head;
Complete b16b cylinder head 78k miles, including cams, retainers etc £450 with red rocker cover
Stroker Kit;
b16b stroker kit. b16b bottom end with b18 crank, p73 rods and pistons. will come unassembled with brand new acl bearings, full sump, oil pump oil pickup and i will include a full weld in baffle kit (brand new from tegiwa). all that is needed is new piston rings. £600
Bronze rocker cover £50 offers
ECU's;
:hondata s300 with usb cable (software is available free online) £350 delivered
:b16b pre face ecu £70 delivered
bd2a converter harness for hondata £30 or £20 with the s300
starter motor;
full working order £20
Vtec Controller;
apexi vtec controller £80 offers
Inlet;
b16b inlet manifold with throttle body, injectors etc £160
Manifold;
5zigen dc2 2.5" collector manifold. has a hairline fracture in one of the welds that will be fixed before sale, £ reserved
Gear box;
cusco type rs 1way lsd gear box (s4c) mileage is 78k miles (unknown how long it has had the cusco lsd fitted) excellent condition, no crunches or whines £650 (can be delivered)
Wheels;
ek9 wheels refurbed last year £150
The parts below will be still be getting sold as they are no longer needed
Reputation: http://www.ek9.org/forum/reputation-center/29887-dan22h.html
Paypal?: yes (buyer pays fee's) or cash on collection
Location: parts can be collected from Dunfermline Fife (scotland), or from Telford (england) i can also arange to meet in between or near by.
b18c block (bare) with oil pump, water pump and sump with full crank girdle bearing caps etc
£60
b18c type r crankshaft. spun a bearing and has marked the crank. i have been told by a local machine shop that it can be reground £20 (please note this is not the crank from my stroker kit for sale, that crank is fine.
The damaged journal is shown on the middle journal in this pic
Coilovers; (REDUCED)
Genuine Spoon Fully adjustable coilovers. have covered approx 15k miles and have slight corosion but are still in good working order. please note this picture was taken a couple months ago before they were refitted. i will get up to date pics for anyone interested £350
Head;
Complete b16b cylinder head 78k miles, including cams, retainers etc £450 with red rocker cover
Stroker Kit;
b16b stroker kit. b16b bottom end with b18 crank, p73 rods and pistons. will come unassembled with brand new acl bearings, full sump, oil pump oil pickup and i will include a full weld in baffle kit (brand new from tegiwa). all that is needed is new piston rings. £600
Bronze rocker cover £50 offers
ECU's;
:hondata s300 with usb cable (software is available free online) £350 delivered
:b16b pre face ecu £70 delivered
bd2a converter harness for hondata £30 or £20 with the s300
starter motor;
full working order £20
Vtec Controller;
apexi vtec controller £80 offers
Inlet;
b16b inlet manifold with throttle body, injectors etc £160
Manifold;
5zigen dc2 2.5" collector manifold. has a hairline fracture in one of the welds that will be fixed before sale, £ reserved
Gear box;
cusco type rs 1way lsd gear box (s4c) mileage is 78k miles (unknown how long it has had the cusco lsd fitted) excellent condition, no crunches or whines £650 (can be delivered)
Wheels;
ek9 wheels refurbed last year £150
Last edited: