asr subframe sway bar and function7 control arms

[konradinu]

I have in mind of getting an asr sway bar kit and function7 control arms . You all know what an asr kit includes. My question is this. I was going around on Honda tech and some of them said that they encountered some problems during mounting.

this is what one of them said. "I tried to test fit the oem endlinks into the middle upper hole of the Function 7 LCA and the bolt that goes through the LCA is just a little bit to short to mount the nut on the other side. Should I be mounting them in one of the other holes?"

 

[Zwitter]

this is what one of them said. "I tried to test fit the oem endlinks into the middle upper hole of the Function 7 LCA and the bolt that goes through the LCA is just a little bit to short to mount the nut on the other side. Should I be mounting them in one of the other holes?"

Use the ones supplied with the ASR kit.

 

[blinx9900]

Get new bolts if you must, problem solved.

 

[tico_ek9]

I have the same set but ordered the blox endlinks

 

[m0nch1zzl3]

Yeah the bolt on the oem endlinks are too short. You have to get new endlinks. ive got function 7 endlinks.