oscarsayco
Well-Known Member
- Joined
- Jun 16, 2008
- Messages
- 1,784
This is not my car is a friend of mine....
first of all this car was tuned for 30 minutes (the tuner had to leave out town ) so for that same reason he only did 3 dyno pulls..so here is the set up...
STOCK STOCK 08 tsx block
04 type s head ported by endyne
double springs
retainers
oversize flat valves
real time racing cams
afi intake manifold
accufab 90mm throttle body with 4" velocity stack
asp headers with reverse megaphone
id 1000cc injectors
E85 fuel
that's pretty much it the reason why my friend left the stock block is to see how much hp. he could get out of a stock block with fully built ported and polished head...and the final numbers are..
273 whp
189 tq
i will get pictures and videos in a couple of days..
...any comments good or bad are welcome.
first of all this car was tuned for 30 minutes (the tuner had to leave out town ) so for that same reason he only did 3 dyno pulls..so here is the set up...
STOCK STOCK 08 tsx block
04 type s head ported by endyne
double springs
retainers
oversize flat valves
real time racing cams
afi intake manifold
accufab 90mm throttle body with 4" velocity stack
asp headers with reverse megaphone
id 1000cc injectors
E85 fuel
that's pretty much it the reason why my friend left the stock block is to see how much hp. he could get out of a stock block with fully built ported and polished head...and the final numbers are..
273 whp
189 tq
i will get pictures and videos in a couple of days..
...any comments good or bad are welcome.
Last edited: