I have put this off for a long time, but have finally come to the decision to break my car. I have owned it since new and the current mileage is 133K but had a B18C and other upgrades in 2006 when the mileage was 108K.
I would sell the car complete but the rear arches need repairing, this was the only thing it failed on MOT, because the rust was within 12 inches from a suspension mount.
Below i will list briefly the parts i would like to sell first, as i don't want the car sitting around with loads of bits left. Feel free to make sensible offers, i am a mature enthusiast and all mechanical parts have been treated with care.
Front and rear seats
Interior plastics
Mats
Doors
Tailgate
Wings
ABS Sensors & Pump
Clutch and brake Cylinders
VTI alloy wheel with tyre
If there is anything you need then please ask. If i still have the large body panels end of play Tuesday, then i will take them to the scrap yard, i need the space.
ENGINE SOLD
B18C taken from a ITR in Japan with 28K on it, was inspected and full leak down carried out before stripping down and fitting modified head.
B18C Standard Bottom end
B18C Head
Ported and polished
Supertech stainless steel inlet valves
Econel exhaust valves
Adjustable cam gears
Hondaworks cams
Deutzwerks yellow Injectors
lightened Flywheel
Custom Cam Cover
Lots of other tinkering
Engine makes approx 230HP and 160LB/FT, at present mapped with Apexi Power FC with vtec point set at 6600K standard redline. Not driven on high cam all the time, as car produces plenty of power lower down revs and covers ground very quickly. Does not burn oil, never bounced off the limiter and always warmed up gently. Regular Oil Changes with Motul 5W 40 Fully synthetic, Coolant system flushed and checked then re-filled with type 2 Honda Pre-mixed. This has been built as an endurance engine and suits my EK4 very well, in a 9 i think it would be amazing
£2100
£2650 if brought with gearbox
ECU SOLD
Apexi Power FC with Hand commander
£450 would do a deal if brought with engine
DRIVETRAIN
S4C Gearbox, Exedy Clutch and Mugen 1.5 Way Plated diff
Very good condition with no crunches, very smooth, slightly heavy clutch
£650 SOLD
INDUCTION SOLD
Mugen Gen 2 DC2 Air Box, Mint condition with freshly cleaned and re-oiled filter. Fits in EK engine bay with Radiator Bottle re located.
£450
EXHAUST SOLD
Hondaworks/Hytech 4-2-1 Manifold wrapped, no scrapes or dents £600
200 Cell Race Cat £120
Spoon Sports B Pipe, cut to fit cat if i remember correctly, will check. Very good condition with no scrapes or dents £140 SOLD
Mugen Twin Loop Rear Silencer, excellent condition no scrapes or dents like mirror £450 SOLD
SUSPENSION SOLD
Mugen 5 way Adjustable shock and springs, good condition with small amount of corrosion on painted body. On the softest setting these are softer than factory EK4 but more controlled. They only lower the car 25mm but handle lovely
£650
Mugen Front Strut Brace £130 SOLD
WHEELS SOLD
Mugen MF8 7" x 16" ET43mm in Bronze, very good condition and very light. Not produced anymore. They have got Hankook Evo 12 Tyres on with plenty of tread left. Come with Mugen wheel nuts and center covers
£850 SOLD
I would like firm offers on the larger items before i sell wheels and suspension, as it's easy to push the car around.
All parts are avaidable from this car, so please ask for condition and prices. I will get some pics up of bits soon as i have interest.
Bodywork on this car is original and in very nice condition, been detailed when needed. So if you want to buy the complete car and do the arches then make me an offer.
Thanks For Looking
Couple of pics so you get an idea
[/URL][/IMG]
[/URL][/IMG]
[/URL][/IMG]
Item for sale: EK4 Dashboard SOLD
Condition: very very good
Price:£80
This has been taken from my EK4, it is very clean with no marks. i have all the other parts and panels, see below
I can post this but at the buyers cost, collection is best, delivery is possible but depends how far away.
[/URL][/IMG]
[/URL][/IMG]
Item for sale:interior plastics
Condition: very good with no marks
Price:£5 plus
Taken from my EK4
[/URL][/IMG]
Item for sale:EK4 VTi alloy wheel
Condition:New
Price: £50
This was the spare wheel in my EK4, never been fitted and still has the original Dunlop SP on it.
[/URL][/IMG]
[/URL][/IMG]
Item for sale:EK4 seats and door cards, and other plastic interior parts
condition: good and clean
Price:£50 front seats
£40 rear seats
£20 door cards
£20 plastic sill covers
[/URL][/IMG]
[/URL][/IMG]
Item for sale:full set mats, made by Autostyle, proper fit
Condition:very good, small amount of wear to drivers heel area
Price: £30
[/URL][/IMG]
Item for sale:EK parcel shelf
Condition:very good
Price: £30
[/URL][/IMG]
Item for sale:EK4 Tailgate, with glass and spoiler
condition: very good, nice paint no dents, ver very small rust starting at bottom of plate reccess.
[/URL][/IMG]
[/URL][/IMG]
Item for sale:Front wings for EK pre-face 96-98
Condition:very good, no dents or large scratches
Price: £25 each
[/URL][/IMG]
Item for sale:EK doors
Condition: Good, few stone chip on bottom, but no dents, and paintwork is very smooth and well looked after, small amount of rust on one, see photo
Price: £40 each
[/URL][/IMG]
[/URL][/IMG]
[/URL][/IMG]
Item for sale:Clutch master cylinder For EK4
Condition: very good, brought new in 2007, genuine Honda/Nissin
Price: £20
[/URL][/IMG]
Item for sale:EK4 Brake servo and master cylinder
Condition: good working order
Price: £50
[/URL][/IMG]
Item for sale:ABS pump for EK4
Condition: good working order
Price:£20
[/URL][/IMG]
Item for sale:Clutch slave cylinder
Condition: good working order, new in 2007, genuine Honda/Nissin
Price:£20
[/URL][/IMG]
Item for sale: Front ABS sensors
Condition: good working order
Price:£40 each or £60 for both
[/URL][/IMG]
Item for sale:Full rear disc conversion,Trailing arms,Hubs/Bearings,Callipers,carriers,discs and pads, ABS sensors and handbrake cables
Reputation: urban boy
Price: £200 posted SOLD
Paypal:Yes
Location: Norwich
Condition: very good, parts recently re-furbed 1k ago
Description: these parts come of my EK4, everything was stripped down around 3 years ago. Trailing arms were powder coated and had Mugen RTA bushes inserted, brake callipers were also stripped and re-built with new pistons, seal kit and handbrake springs, also clevis pins and all bolts replaced with new OEM Honda. The callipers are 262mm and are powder coated Anthracite, ad are in perfect working order. Discs are OEM Honda, also pads, both have 1K on them approx. The Bearing/Hub units were brought new at the same time at a cost of £204 each. Both ABS sensor's are supplied. The trailing arms have Oem Compensator arms replaced at the same time. I can supply all bolts, and they are in very good condition.
Good upgrade for EK3,EJ9 that have drums on the rear.
[/URL][/IMG]
[/URL][/IMG]
[/URL][/IMG]
Item for sale:Genuine EJ, EK Honda Access window visors, with all clips
condition: very good, no scratches, there is a clip missing from one of the visors, its the one that holds the back into the black plastic trim/rubber. I think i have this somewhere. I have never bothered putting it back on as the visor is fixed so well anyway, and its not visible once fitted.
Price:£60
[/URL][/IMG]
[/URL][/IMG]
[/URL][/IMG]
All these parts can be posted, the larger items i prefer pick up, but will post at buyers expense.
Thanks For looking
I would sell the car complete but the rear arches need repairing, this was the only thing it failed on MOT, because the rust was within 12 inches from a suspension mount.
Below i will list briefly the parts i would like to sell first, as i don't want the car sitting around with loads of bits left. Feel free to make sensible offers, i am a mature enthusiast and all mechanical parts have been treated with care.
Front and rear seats
Interior plastics
Mats
Doors
Tailgate
Wings
ABS Sensors & Pump
Clutch and brake Cylinders
VTI alloy wheel with tyre
If there is anything you need then please ask. If i still have the large body panels end of play Tuesday, then i will take them to the scrap yard, i need the space.
ENGINE SOLD
B18C taken from a ITR in Japan with 28K on it, was inspected and full leak down carried out before stripping down and fitting modified head.
B18C Standard Bottom end
B18C Head
Ported and polished
Supertech stainless steel inlet valves
Econel exhaust valves
Adjustable cam gears
Hondaworks cams
Deutzwerks yellow Injectors
lightened Flywheel
Custom Cam Cover
Lots of other tinkering
Engine makes approx 230HP and 160LB/FT, at present mapped with Apexi Power FC with vtec point set at 6600K standard redline. Not driven on high cam all the time, as car produces plenty of power lower down revs and covers ground very quickly. Does not burn oil, never bounced off the limiter and always warmed up gently. Regular Oil Changes with Motul 5W 40 Fully synthetic, Coolant system flushed and checked then re-filled with type 2 Honda Pre-mixed. This has been built as an endurance engine and suits my EK4 very well, in a 9 i think it would be amazing
£2100
£2650 if brought with gearbox
ECU SOLD
Apexi Power FC with Hand commander
£450 would do a deal if brought with engine
DRIVETRAIN
S4C Gearbox, Exedy Clutch and Mugen 1.5 Way Plated diff
Very good condition with no crunches, very smooth, slightly heavy clutch
£650 SOLD
INDUCTION SOLD
Mugen Gen 2 DC2 Air Box, Mint condition with freshly cleaned and re-oiled filter. Fits in EK engine bay with Radiator Bottle re located.
£450
EXHAUST SOLD
Hondaworks/Hytech 4-2-1 Manifold wrapped, no scrapes or dents £600
200 Cell Race Cat £120
Spoon Sports B Pipe, cut to fit cat if i remember correctly, will check. Very good condition with no scrapes or dents £140 SOLD
Mugen Twin Loop Rear Silencer, excellent condition no scrapes or dents like mirror £450 SOLD
SUSPENSION SOLD
Mugen 5 way Adjustable shock and springs, good condition with small amount of corrosion on painted body. On the softest setting these are softer than factory EK4 but more controlled. They only lower the car 25mm but handle lovely
£650
Mugen Front Strut Brace £130 SOLD
WHEELS SOLD
Mugen MF8 7" x 16" ET43mm in Bronze, very good condition and very light. Not produced anymore. They have got Hankook Evo 12 Tyres on with plenty of tread left. Come with Mugen wheel nuts and center covers
£850 SOLD
I would like firm offers on the larger items before i sell wheels and suspension, as it's easy to push the car around.
All parts are avaidable from this car, so please ask for condition and prices. I will get some pics up of bits soon as i have interest.
Bodywork on this car is original and in very nice condition, been detailed when needed. So if you want to buy the complete car and do the arches then make me an offer.
Thanks For Looking
Couple of pics so you get an idea
Item for sale: EK4 Dashboard SOLD
Condition: very very good
Price:£80
This has been taken from my EK4, it is very clean with no marks. i have all the other parts and panels, see below
I can post this but at the buyers cost, collection is best, delivery is possible but depends how far away.
Item for sale:interior plastics
Condition: very good with no marks
Price:£5 plus
Taken from my EK4
Item for sale:EK4 VTi alloy wheel
Condition:New
Price: £50
This was the spare wheel in my EK4, never been fitted and still has the original Dunlop SP on it.
Item for sale:EK4 seats and door cards, and other plastic interior parts
condition: good and clean
Price:£50 front seats
£40 rear seats
£20 door cards
£20 plastic sill covers
Item for sale:full set mats, made by Autostyle, proper fit
Condition:very good, small amount of wear to drivers heel area
Price: £30
Item for sale:EK parcel shelf
Condition:very good
Price: £30
Item for sale:EK4 Tailgate, with glass and spoiler
condition: very good, nice paint no dents, ver very small rust starting at bottom of plate reccess.
Item for sale:Front wings for EK pre-face 96-98
Condition:very good, no dents or large scratches
Price: £25 each
Item for sale:EK doors
Condition: Good, few stone chip on bottom, but no dents, and paintwork is very smooth and well looked after, small amount of rust on one, see photo
Price: £40 each
Item for sale:Clutch master cylinder For EK4
Condition: very good, brought new in 2007, genuine Honda/Nissin
Price: £20
Item for sale:EK4 Brake servo and master cylinder
Condition: good working order
Price: £50
Item for sale:ABS pump for EK4
Condition: good working order
Price:£20
Item for sale:Clutch slave cylinder
Condition: good working order, new in 2007, genuine Honda/Nissin
Price:£20
Item for sale: Front ABS sensors
Condition: good working order
Price:£40 each or £60 for both
Item for sale:Full rear disc conversion,Trailing arms,Hubs/Bearings,Callipers,carriers,discs and pads, ABS sensors and handbrake cables
Reputation: urban boy
Price: £200 posted SOLD
Paypal:Yes
Location: Norwich
Condition: very good, parts recently re-furbed 1k ago
Description: these parts come of my EK4, everything was stripped down around 3 years ago. Trailing arms were powder coated and had Mugen RTA bushes inserted, brake callipers were also stripped and re-built with new pistons, seal kit and handbrake springs, also clevis pins and all bolts replaced with new OEM Honda. The callipers are 262mm and are powder coated Anthracite, ad are in perfect working order. Discs are OEM Honda, also pads, both have 1K on them approx. The Bearing/Hub units were brought new at the same time at a cost of £204 each. Both ABS sensor's are supplied. The trailing arms have Oem Compensator arms replaced at the same time. I can supply all bolts, and they are in very good condition.
Good upgrade for EK3,EJ9 that have drums on the rear.
Item for sale:Genuine EJ, EK Honda Access window visors, with all clips
condition: very good, no scratches, there is a clip missing from one of the visors, its the one that holds the back into the black plastic trim/rubber. I think i have this somewhere. I have never bothered putting it back on as the visor is fixed so well anyway, and its not visible once fitted.
Price:£60
All these parts can be posted, the larger items i prefer pick up, but will post at buyers expense.
Thanks For looking
Last edited: