Ok so i have been on about doing a k swap for some time now, so i though why not start a build tread here is a picture of my ek4 of which the k20 is going in
the picture are a bit old so the car has changed a little since
ek9 front bumper
ek9 rear bumper
ek9 boot
ray volks wheel nuts
red ek9 carpet
k20 swap parts
i dont have any picture of the parts i have bought for the kswap but here is a spec:
*EP3 k20 engine and gearbox
*Hybrid racing conversion ekk2 mounts
*Hybrid racing conversion harness
*Hybrid racing radiator
*Hybrid racing hose
*Hybrid racing hose insert
*Hybrid racing 12" slim fan
*Hybrid racing 70mm throttle bodys
*Hybrid racing exhaust manifold
*Hybrid racing bolt in short shifter
*Hybrid racing fuel rail and lines
*Hybrid racing shift cables
*Hybrid racing 2.9 axles
*Replacement termo unit
*Replacement coolant switch
*JDM dry carbon firbe intake
*Karcept A/C & P/S delete kit with alternator relocation
*OEM honda rbc intake manifold bord out to 70mm
*Karcept k series throttle cable bracket
*DC5 throttle cable
*RHD clutch line
i will get pictures as soon as all the parts have arrived as only have a few bit but all are pay for just waiting to be delivered
only have the following parts left to buy
*Fuel pressure regulator
*Mfactory 1.5 way diff
*Competition stage 1 clutch
* honda data kpro ecu
*and very think needed for a full service
all comments and advise are always welcome
the picture are a bit old so the car has changed a little since
ek9 front bumper
ek9 rear bumper
ek9 boot
ray volks wheel nuts
red ek9 carpet
k20 swap parts
i dont have any picture of the parts i have bought for the kswap but here is a spec:
*EP3 k20 engine and gearbox
*Hybrid racing conversion ekk2 mounts
*Hybrid racing conversion harness
*Hybrid racing radiator
*Hybrid racing hose
*Hybrid racing hose insert
*Hybrid racing 12" slim fan
*Hybrid racing 70mm throttle bodys
*Hybrid racing exhaust manifold
*Hybrid racing bolt in short shifter
*Hybrid racing fuel rail and lines
*Hybrid racing shift cables
*Hybrid racing 2.9 axles
*Replacement termo unit
*Replacement coolant switch
*JDM dry carbon firbe intake
*Karcept A/C & P/S delete kit with alternator relocation
*OEM honda rbc intake manifold bord out to 70mm
*Karcept k series throttle cable bracket
*DC5 throttle cable
*RHD clutch line
i will get pictures as soon as all the parts have arrived as only have a few bit but all are pay for just waiting to be delivered
only have the following parts left to buy
*Fuel pressure regulator
*Mfactory 1.5 way diff
*Competition stage 1 clutch
* honda data kpro ecu
*and very think needed for a full service
all comments and advise are always welcome