RagingAngel
本田 Gearing Authority
- Joined
- Mar 26, 2008
- Messages
- 2,161
the vtec of my built b20vtec is not working/not engaging, any suggestions how to work this up
yeah you give us more information first.
the vtec of my built b20vtec is not working/not engaging, any suggestions how to work this up
I'm in deep **** already
Anyway, thanks for the great info and i'll figure out the CR later. But I totally don't know if I should keep building this B20 then.
Do you know any shop in Hong Kong is reliable?
Spoonson, you are back. Where did you go all this time?
Putting a B20 in your Civic is heading into "towed" territory and ever since the illegal race incident most Civic EKs are pulled over and engines checked...
As for the B20 mods, no-one in HK can do it properly, the ones i know all blew up. You could try D2 racing they are good with B series. With HDI closed, you will find it extremely difficult to find a good tuner to tune it properly on the street.
I am surprised as ragingangel said, how can they just mill 1mm why not 5mm for good measure, slap the cam timing say, +2 -5 and it will be very fast.
Finally!! I wondered where you were. Good to catch up here..HDI is closed but yeah, Eric can tune at CR. Thats where I did it..do you have the FC-power edit software? You aren't going to tune it via the gameboy are you???
find out what your compression is to begin with.
There's no point in going with bigger cams if you simply do not have the compression to support it.
You WILL gain power from going to a larger cam but at the expense and loss of bottom end torque...which is kind of the main reason of going 2.0L in the first place right?
hye guys....
i'm planning on building b20 engine....
my current engine is b16b...
here's the stuff :
1.skunk2 pro series stage 3 cam+valve spring+retainer (complete cam stuff)
2.porting & polish head
3.CRV block with 85mm wiseco or supertek forged piston
4.h22a injector
5.Aem/toda adjustable cam pulley
6.OS Giken clutch
7.Skunk2 pro series intake
8.2.5" piping
Is there's anything that i need to add?
i need your comment on this
sound like a good build with to me, estimating 220-230 whp with 160-170 lbs/ft of torque i suppose with a good tune