jdogdotcom
Member
- Joined
- Jan 17, 2008
- Messages
- 205
Just a quick question, do I need to get longer studs if I put 10-15mm spacers? I'm using rota grids with rays extended wheel nuts
Cheers
Ben
Cheers
Ben
We make spacers to order if you're after a set. All CNC lathe machined from billet, we can make just the slot on, hubcentric (with a centering lip) if thick enough and bolt on if you like.
Anything thicker then 5mm will need to go upto at least 10mm so the lip can be machined into it, and will require longer studs.
Depends...
There's the proper way of splitting the hub, then whack the studs out, drag the new ones in, or, another option is to take the angry grinder to the hub and take a nick out of it to give the clearance needed... like so:
We make spacers to order if you're after a set. All CNC lathe machined from billet, we can make just the slot on, hubcentric (with a centering lip) if thick enough and bolt on if you like.
Anything thicker then 5mm will need to go upto at least 10mm so the lip can be machined into it, and will require longer studs.
so should i go for 10mm or 15mm?
Do you sell longer studs?