Various b18 upgrades - many brand new / unused


G

gcs2244

New Member
Joined
Mar 8, 2009
Messages
10
compatable with P72 b-series heads only:

Eldebrook Victor X 70mm throttlebody complete with adaptor plate and gaskets ref 3811 & 38112 - £100

SKUNK PRO 2 inlet manifold - £200

SUPERTECH HIGH COMPRESSION PERFORMANCE VALVES - HIVN-100F - £150

Import Performance Parts - Import Performance Engine & Racing Parts



compatable with PR3, PR4 and P72 b-series heads

BRIAN CROWER CAMS - BC0012 - AND BC0010S SPRING / RETAINER KIT -£450 - prov sold

BrianCrower.com - Brian Crower - BC - Honda Civic Si / Acura Integra - B16A / B18C

SUPERTECH HIGH COMPRESSION PERFORMANCE VALVES - HIVN-100F - £150

Import Performance Parts - Import Performance Engine & Racing Parts


also have a pair of piper cam vernier pulleys, anodised red - these are used and have a few marks on them from when cam snapped, but are still ok to use - £100 think they should be ok for any b18 / b16 engine but buyer to do own research on this.

pair of used standard cams - from an Si Integra - £50

a single inlet piper cam VTECBP285 (ultimate road) - £50
Piper Cams frames page

Tel Gary 01233 631061 - based in Kent

sorry but not paypal but can take cards -thru my business

may do a deal for everything - try me
 
Last edited:
Just to let everyone know, i meet Gary over the weekend @ snetterton!
He is a top bloke & a trusted seller!
Thanks agen for your advice with my R888 on sat mate!:secret:
 
Crower Cams / springs etc prov sold

cheers Jimbob - always happy to help - good to meet you also

found this if it helps:

The R888 has a semi race construction (very stiff) and a race tread compound. The optimum tread temperature range is between 85C and 95C measured using a probe type pyrometer, and ideally a maximum difference across the tread of 9C. The maximum hot pressure we recommend is 40psi. Camber angles up to 5 degrees are permissible but the final setting will depend on tread temperatures. It is advisable to have as much positive castor as practical as castor induces a beneficial camber change during cornering. I recommend that the tyres be put through 2 heat cycles before hard use.


The pressures you use will initially depend on the weight of the car, too little pressure on a heavy car can lead to over deflection of the tyre and subsequent failure.

Below are some basic settings:

VEHICLE WEIGHT COLD PRESSURE HOT PRESSURE
Very Light < 800kg 17 - 22 psi 22 - 29 psi
Light 800kg - 1000kg 20 - 26 psi 24 - 32 psi
Heavy 1000kg - 1400kg 23 - 27 psi 28 - 40 psi
Very Heavy > 1400kg 27 - 35 psi 37 - 40 psi


As a tyre gets hotter the pressure increases, this is due to the moisture in the air. The cold pressure you set to achieve a desired hot pressure will depend on the conditions on the day i.e. ambient and track temperature, wet or dry. If the day/track is cold you will need to start with a higher cold pressure as the tyre will not get as hot therefore the pressure increase will not be so great.
Hot pressures must be balanced side to side. Once the tyres have cooled you will find that you will have a difference in pressure side to side, if you have been racing on a right hand track you will find the offside pressures will usually be higher than the nearside.


Gary
 
Some very good info there Gary, Thanks for sharing!:bow:
Hope you dont mined but i have copyed this info into it's own thread in the tyre section!
 
happy to help - just hope everyone don't start flying past me on trackdays now :nono: :angry2:

now where's them vids?? any of my car??
 
sorry:

pair of used standard cams - from an Si Integra - £50

they comes from a 190hp integra?
 
can you say the number of the motor??

B18C6, B18C5, B18C1, B18C3

what is it?
 
pimpinblackcivic said:
does the throttle body still have tps on it?
Click to expand...

has everything that came in the box - not that techy myself but will ask someone who is and let you know


you may wanna look here under victor x throttle bodies - seems to say yes to me

Edelbrock - Performance Carburetors, Cylinder Heads, Intake Manifolds, EFI Systems, Fuel Pumps, Crate Motors

cheers

Gary

ps now on ebay

Honda Edelbrock Victor X 70mm throttlebody c/w spacer on eBay, also, Honda, Car Parts, Cars, Parts Vehicles (end time 17-Mar-09 14:38:33 GMT)
 
Last edited:
You must log in or register to reply here.
Back
Top