USDM Citylights Style

[SIRALBERT]

Hello

Anyone know what wires must be connected to the parking lights are always on and blink?

Like this, USDM Citylights Style:

 

[jason e-ek4]

you have to use a dual filament bulb similar to the one in the brake light (dim and bright). The wires to connect would be from your normal park light bulb to the lower wattage filament.

 

[linh-ej9]

you will need to change the bulb holder for one a double filiment bulb holder (same as you brake light one)

there will be 3 wires
1 ground
1 you tap into your sidelight
1 from the indicator.

you will need to order double filiment amber bulbs 5/21watt. from the USA, i have not seem them in the uk.

 

[SIRALBERT]

Tks

Any DIY link with pics?

 

[iHenry]

If you want your lights like the one in the picture you don't have to get a special bulb just take the wires from your city light and splice them into your turn signal/corner light.

 

[General]

If you need a double filament bulb, pm me, I can get them for you

 

[TypeRuss]

Dunno if it'd work on an ek light but on my old eg coupe l just drilled a hole big enough for a side light bulb holder, then used amber side lights, just had to connect to the headlight sidelights and hey presto did'nt need to fuss about with dual filament bulbs etc...

 

[nikolas-type rs]

Heres a link i found on civiclife.net

http://www.civiclife.net/board/index.php?/topic/20354-usdm-side-lights/

and heres a pic of my ek9 with them on. They still flash when i indicate and light up when i turn my lights on.