Stanely H.I.D Help

[IntermaN]

I had this on my EK9 since it was imported, but never tested to see if it worked or not. Now I want to see if if it works but I am not sure how to test it before I go about installing it to my car.

Does anyone one know where each of these plug into?

The pictures are of one side only.

I know this one plugs into the existing plugs.

Thanks
Andy

 

[timmy87]

From what I know, you'll need to test out on a car, the hoops are for earthing??
As for earthing it, I need to check mines to see where they're earthed.

Plug the light bulbs in and it should work? Hi and Lo beam.
If they work, last thing to do is securing the ballasts so it doesn't wobble when driving, so cable tie it to something.

 

[Darragh]

I have the same set , they are Raybrig, which are Stanley electric co.

Lay it all out and plug in all the connectors you can see , you will be left with the 2 H4 male connectors , 2 earths ( white wires with eyelet's) and 2 positives ( red wires with crescent connectors ).

Plug in the h4 connections , 2 postives to positive and 2 earths to earth , both straight to the battery for best performance and voila !.

There is alot of wiring , took me a a good evening to tuck it away , most of it sits in the wings with the 2 ballasts fitted to the bumper reinforcing bar .

Good luck