Spoon n1


E

Eskay

Active Member
Joined
Sep 4, 2006
Messages
1,074
Item for sale: Spoon N1 BACKBOX
Price: £200 collected or can post at extra cost
Paypal?: Yes (if buyer pays fees)
Location: Birmingham
Condition: 9/10 (bit of plastic melted just by spoon plaque where the bumper was touching but will be cleaned up tomorrow once its removed off the car.
Description: Used Spoon N1 In very good Condition

---sorry forgot to mention the original pipe has been cut and has been replaced with a 2.5inch section to fit onto my 2.5inch system.---

Pictures:

10042011875.jpg


10042011877.jpg


10042011876.jpg


14042011890.jpg


14042011892.jpg
 
Last edited:
Would love this off you mate, but too many bills this month :( glws
 
Try kells led on here. Might be interested. Especially at that price. Glws.
 
update: sorry forgot to mention the rear flange that connects to the b-pipe has been cut and has had a sleeve section made for it to fit onto my 2.5inch system.
 
So will this fit an ek3 without modification? Or will the 2.5'' section need to be cut off?

Sorry if its a stupid Q :eek:
 
Hi mate cant pm you as i havent posted enough,

So id need to get a 2.5'' section from my cat back? Or is this wrong, or could i cut the 2.5'' section off and weld what diametre pipe on?

Sorry bud bit confused lol :p
 
you can do either mate.

option 1. get a 2.5" catback b-pipe to fit onto the spoon n1 backbox as it is

option 2. get the 2.5" section taken off the spoon n1 and get a smaller diameter pipe fitted so that it can fit your existing b-pipe. hope this helps..
 
Spot on :)

Which would be better/does it matter?

Cheers, ps did the plastic come off it where it melted onto it?
 
i'd personelly get a smaller diameter pipe fitted onto the backbox fro the time being as its pointless getting a 2.5" system made for a 1.4 engined civic keep hold of the 2.5" section for later if you decided to fit a bigger engine simply get a 2.5" b-pipe made refit the 2.5" onto the backbox and your done.
 
So if i cut the 2.5'' off and had a smaller pipe welded back on, id have to have the flat bracket welded on as well right?

This seems like a fair hassle if im honest bud :/
 
You must log in or register to reply here.
Back
Top