speedo not working

Wilz

Member
Joined
Dec 5, 2014
Messages
53
Hi all,

bit of an issue, I got round to fit the s80 LSD gearbox in the car, but after the gearbox change, speedo has stopped working,
I swapped back to the original speed sensor and it's the same, no reaction on the speedo at all.

Any ideas on the issue and what else I can look at to the speedo working again?
Thank you
 

ScottEk9

N.A King
Joined
Oct 27, 2006
Messages
239
Hi all,

bit of an issue, I got round to fit the s80 LSD gearbox in the car, but after the gearbox change, speedo has stopped working,
I swapped back to the original speed sensor and it's the same, no reaction on the speedo at all.

Any ideas on the issue and what else I can look at to the speedo working again?
Thank you
I would double check the wiring for power and check the pins to make sure they are making contact.
 

Wilz

Member
Joined
Dec 5, 2014
Messages
53
I would double check the wiring for power and check the pins to make sure they are making contact.
thanks mate, I've ran a wiring check from the speed sensor cable pins to the instrument cluster and it does have voltage reading on the wiring,
the speed senor is also giving out voltage reading on the multimetre.

I can only try and change the instrument dash / speedo itself to find out. currently trying to source one.
Not sure what else to check, speedo worked fine before i done the S80 LSD gearbox swap,

appreciate any more advice on this.

thank you
 
Top