Remote lock stopped working on clifford g5


ck89

ck89

Colm
Joined
Oct 17, 2010
Messages
127
Doors used to lock/unlock when arming/disarming the alarm, the battery went flat a few weeks ago and hasn't worked since.
The alarm still arms/disarms, blackjax still functioning and doors lock when I go over a certain rpm. Basically the alarm is working as it always has except for the remote lock.

I checked for loose wires behind doorcards, checked fuses but no joy, also checked the manual and fiddeled around with the settings and the remote lock is turned on.

Anybody know why this function would have stopped working?
 
im having a similar probelm too. put new batterys in the fob but only last about 2 months might try it again could have been a bit of a dodgey battery.
 
I would check the blue and green for neg signal when arming and disarming. if you not getting the signal you might need to repalce the unit.
if you are getting signal need to check locking solenoids.
 
This problem was still occurring until yesterday when the central locking start working from the remote fob, I drove maybe 15 minutes after it was working and it has stopped working again!
I assume there's a lose connection somewhere but I checked the alarm and all wires and connections coming and going to it and all seem fine,
Anybody have this issue or know how to solve it?
 
You must log in or register to reply here.
Back
Top