Rear Discs For EK9

[Steve]

Are they the same as the UKDC2 / 98spec JDM DC2.

Read on here they are, but when i have went to get them they show up as a different size, and they place didn't have the ones listed as "EK9" in stock.

The fronts appear to be identical but the rears are not. Can someone confirm? The shop might have them listed wrong and they could be identical?

EK9 front
Solid or Vented: V
No of Holes/Bolts: 5
Diameter (mm): 282
Height (mm): 48
Thickness New/Min (mm): 23 -- 21

EK9 Rear
Solid or Vented: S
No of Holes/Bolts: 5
Diameter (mm): 260
Height (mm): 49
Thickness New/Min (mm): 11--10

UK DC2/ 98spec JDM front
Solid or Vented: V
No of Holes/Bolts: 5
Diameter (mm): 282
Height (mm): 48
Thickness New/Min (mm): 23 -- 21

UK DC2/ 98spec JDM rear
Solid or Vented: S
No of Holes/Bolts: 5
Diameter (mm): 260
Height (mm): 48
Thickness New/Min (mm): 09--08

Pretty sure the front discs on both should be 47.* and they have just rounded it up to 48.

 

[Steve]

No body know?

I know the pads are exactly the same, so are the front discs. Just not sure on the rear discs

 

[Uraco]

As far as I know the 5 lug bolt pattern of the ek9 and 98+ dc2 type r share the same front and rear brake caliper, carrier, pads, rotor and even the whole rear trailing and front knuckles. However, difference in the cross member, front lower arms, front upper arms and anti roll bars.

 

[tico_ek9]

they should be not 100% but sure