prelude brakes

[maddrell69em1]

hi guys


just wanting to know if the prelude front and rear brakes will/would fit a em1 civic coupe ?

cheers guys all feedback

 

[gavgen10]

rears dont fit at all, fronts you need to buy a set of mgzs 180 282mm 4x100 front discs if your 4x100, mb6 vti front discs if your 4x114 or ek9 discs if your 5 lug

also you need to shave 1mm off each side of the carrier as the prelude discs are 23mm wide and all the rest are 25mm wide

hth, good upgrade for an em1 though and do able cheap as the discs are only 50-150 a pair depending on what you go for

 

[dzigimon]

Can anyone post a write up or link to DIY with all the details whats needed for this swap?

 

[tama666]

Can anyone post a write up or link to DIY with all the details whats needed for this swap?

Not a DIY guide, but it details everything else.
http://www.ek9.org/forum/brakes/7864-ultimate-oem-brake-upgrade-thread.html

I am running the vtec prelude front rotors with ITR clamps/calipers.