power doors!!!

[ek9ondagrind]

i have a 99 hatch with manual doors and i just bought some power door from an ex coupe how or what do i have to do to make them work on my hatch?!!!

 

[kon0089]

you mean windows ?

 

[kasperwhoo]

This site worked best for me in my convertion soo far all I need is the door panels and switches also door acutators!

96-98 Civic EK Power Window/ Lock/ Mirror Conversion.

 

[ek9ondagrind]

thanks bro but im not really good at all when it comes to electrical work so i just really need to know if i can take the manual doors off completly and put the power ones on and have someone wire them? will i need any type of harnesses?

 

[tango'dcivic]

best off jus buyin the loom. If i remember correctly it part of dash loom. Be alot easier

 

[SlaPPinEK]

On top of replacing the entire doors, you will need the harness that runs from the back of the fuse box and runs toward the back of the driver side of the car and runs across the bottom of the carpet to the passenger side which will also connect to your passenger door. it also runs to the fuel pump. You will need it from a ex.

 

[kasperwhoo]

thanks bro but im not really good at all when it comes to electrical work so i just really need to know if i can take the manual doors off completly and put the power ones on and have someone wire them? will i need any type of harnesses?

The site explains everything you need to know step by step you really can't screw it up!

Also it shows the list of parts you will need for everything so do tell me you can do it by yourself it is the easy!

(The only advice I would give is just make sure when it comes down to connecting the plugs make sure the color codes match up and none are missing)

 

[jdmkiddd]

If you have the complete doors all you need is a

99-00 EX floor harness WITH Locking module box ...( should be colour white )

P/W relay I think ...and power mirror switch ..

Its not that hard to wire up actually .. There's no cutting wires, taping or anything like that .. If your doors are 99-00 ex doors then u just need the harness and it will be plug and play .. If your doors are 96-98 then you will need

96-98 EX floor harness jus need to match ..

Ooo and that link that that guy jus posted above is a great link that's the one I used

 

[ek9ondagrind]

thanks guys i really really appreciate all the help!!!!

 

[tico_ek9]

Look up at my thread!
http://www.ek9.org/forum/interior-exterior/21234-usdm-96-98-99-00-dash-conversion.html