passenger airbag removal question

[immense]

I know this does'nt belong here and I have searched this forum and a few others.

I must be missing something. I dropped the glovebox out and reomoved the 2 10mm headed nuts, after that I'm lost.
I have read that there is a 3rd nut to be removed but I could'nt see it.
It looks like there are 2 screws in really awkward places that need to be removed. Is that right ?
What a total cnut of a job.
Help please.
I was having a good day. the rear diffuser I have made fits like a glove just need to work out a couple of mounting points, the flat underside panel I made for the front bumper also fitted nicely with just a bit of cutting to miss the towing eye's

 

[Ash-EK9]

I beleive there the only 2 screws i ended up removing the das to take the airbag out it was a swine of a job and to be honest i regretted it from the moment the dash went back in i would put it back together bud

 

[Fraz]

You have two nuts at the front of the air bag, and then you have one hidden in the rear...around the middle of the airbag. Once all three are removed you can slide it out.

 

[immense]

Thanks, I've gathered that after looking around on the forums. Doing this stuff slightly hung over in the cold is bad for me, I get wound up easily and have to leave it before I start kicking and throwing things. Going back tommorow to finish it off.