Oem ek9 complete bushes

[Ek9forlife]

Hi guys,fairly new to the posting threads part but have been following the forum for a while so not sure if I'm posting in the right area ,anyways I need some help in locating full oem bushes for my ek9 as I feel they could do with a change,however I'm not interested in poly bushes as I've heard the are too stiff so I only want oem replacements,anyone know where I can purchase them?

 

[IntermaN]

You can buy them individually from Honda and they are pricey, I am not sure if you can buy a complete set.

 

[Ek9forlife]

Thanks for the reply mate,any ideas what the next best thing to oem bushes are without costing a fortune?!

 

[fljoshua129]

Hardrace do a kit. They are made of reinforced rubber so harder than oem but not as hard as polyurethane. If you are replacing the trailing arm bushes then you should go oem. Part numbers are in the resources area for the trailing arm bushes.

 

[Ek9forlife]

Thanks mate,I'm thinking about firstly changing engine mounts,and gearbox mounts as the gearstick moves back/forward slightly when coming off accelerater,am I right in thinking that's the gearbox mount/bush on the way out ?

 

[Ellis]

Thanks mate,I'm thinking about firstly changing engine mounts,and gearbox mounts as the gearstick moves back/forward slightly when coming off accelerater,am I right in thinking that's the gearbox mount/bush on the way out ?

Thats just the linkage moving with take up of drive in the box, prefectly normal realy unless its excessive. but The shifter bushes are well worh replacing anyway. makes the changes nice and tight and is dirt cheap also.

 

[elchunk]

Thanks mate,I'm thinking about firstly changing engine mounts,and gearbox mounts as the gearstick moves back/forward slightly when coming off accelerater,am I right in thinking that's the gearbox mount/bush on the way out ?

more so the rear engine mount probably.