Engine:
Spoon 1.8 Stroker Kit - 81.25
Spoon 2pc High Comp Head Gasket
Skunk2 High Comp Valves
Cylinder Head Ported , Polished And Gas Flowed
Skunk2 Stage II Cams
Skunk2 Titanium Valve Springs And Retainers
Skunk2 Adjust Cam Gears
Skunk2 70mm Tb
Skunk2 IM Machined To Match 70mm - Polished And Gas Flowed
Skunk2 Carbon Composite Fuel Rail
Walbro Fuel Pump
RC 440cc Injectors
AEM Cold Air Intake
Hytech custom 4-2-1 Manifold
Custom De-Cat
Spoon N1 and Spoon B-Pipe
Spoon Engine Mounts
Hondata S300 with Launch Control ...of course!
Transmission:
MFactory Straight Cut Gearkit
Quaife LSD
Exedy Clutch And Fidanza 7lbs Flywheel
Chassis:
Full Adjustable Tein Superstreet Coilovers
Stock 15" EK9 Wheels in Black/Red
Black RAYS Lightweight Wheel Nuts
Uprated bushes... not sure exactly what, have to check the folder of history!
Fast Road Geometry Setup
Interior:
Obviously Recaros, Electrics etc etc
Kenwood MP3 Player
Uprated Front Component Speakers
Uprated Rear 6x9 Speakers
AEM Wideband AFR Gauge
Water Temp Gauge
Exhaust Gas Temp Gauge
Oil Temp Gauge
Oil Pressure Gauge
Exterior:
Full Standard Type R Bodykit
Modified Front Bumper to give cold air to AEM Intake
Seibon OEM Carbon Bonnet
Seibon OEM Carbon Boot
Stock 15" Alloys refurbed in Black/Red Lip
As I'm sure you know, the standard power output for these is 185bhp @ Flywheel and with the above mods, my car is making 211bhp @ Wheels..
Anyway, here are some pics of it:
I need to get my finger out and invest in a decent camera to get any better quality pictures than this I'm afraid!!
The car has got all the bits that I'd have added to a 9, so my plans are quite simple just now:
- Clean and dress Engine Bay
- Clean Seats/Interior
- Paint Correction, de-swirl it, etc
- Possibly a track event at Knockhill if the weather is ok (not likely until 2010 now!!)
Cheers,
Grant
Spoon 1.8 Stroker Kit - 81.25
Spoon 2pc High Comp Head Gasket
Skunk2 High Comp Valves
Cylinder Head Ported , Polished And Gas Flowed
Skunk2 Stage II Cams
Skunk2 Titanium Valve Springs And Retainers
Skunk2 Adjust Cam Gears
Skunk2 70mm Tb
Skunk2 IM Machined To Match 70mm - Polished And Gas Flowed
Skunk2 Carbon Composite Fuel Rail
Walbro Fuel Pump
RC 440cc Injectors
AEM Cold Air Intake
Hytech custom 4-2-1 Manifold
Custom De-Cat
Spoon N1 and Spoon B-Pipe
Spoon Engine Mounts
Hondata S300 with Launch Control ...of course!
Transmission:
MFactory Straight Cut Gearkit
Quaife LSD
Exedy Clutch And Fidanza 7lbs Flywheel
Chassis:
Full Adjustable Tein Superstreet Coilovers
Stock 15" EK9 Wheels in Black/Red
Black RAYS Lightweight Wheel Nuts
Uprated bushes... not sure exactly what, have to check the folder of history!
Fast Road Geometry Setup
Interior:
Obviously Recaros, Electrics etc etc
Kenwood MP3 Player
Uprated Front Component Speakers
Uprated Rear 6x9 Speakers
AEM Wideband AFR Gauge
Water Temp Gauge
Exhaust Gas Temp Gauge
Oil Temp Gauge
Oil Pressure Gauge
Exterior:
Full Standard Type R Bodykit
Modified Front Bumper to give cold air to AEM Intake
Seibon OEM Carbon Bonnet
Seibon OEM Carbon Boot
Stock 15" Alloys refurbed in Black/Red Lip
As I'm sure you know, the standard power output for these is 185bhp @ Flywheel and with the above mods, my car is making 211bhp @ Wheels..
Anyway, here are some pics of it:
I need to get my finger out and invest in a decent camera to get any better quality pictures than this I'm afraid!!
The car has got all the bits that I'd have added to a 9, so my plans are quite simple just now:
- Clean and dress Engine Bay
- Clean Seats/Interior
- Paint Correction, de-swirl it, etc
- Possibly a track event at Knockhill if the weather is ok (not likely until 2010 now!!)
Cheers,
Grant