lowering... how much


K

kristian75

New Member
Joined
Apr 15, 2008
Messages
103
Hello.... thinking about lowering my ek9 whith springs and i´m wondering what you guys recomend either a 3cm (1,18") or a 5cm (1,96") drop, can i do the bigger drop whitout changing shocks and do camber settings?

Thanks/ Kristian75
 
as little as possible if you`re not going to change anything else, also remeber how good the stock suspension is, don`t buy rubbbish or you will be downgrading as oppose to upgrading
 
its cobra springs.... they suppose to be ok..... so 5cm is to much then? i´m going for coilovers later but i cant quite afford them yet so i´m going for springs to begin with i think...
 
COBRA SPRINGS?!?!?!

i wouldnt be putting them anywhere near my EK9,

depends what your after really i suppose looks or handling,,

EK9 is all about handling really though.............

i would save the money the springs are going to cost you and put that towards your coilovers if you feel you want to deviate from the standard suspension...
 
both looks and handeling.... but hanteling is deffintently number 1...... if the springs are **** then i wont buy them..:nice:.... when it comes to looks i just want it a little lower...
 
If handling is your #1 priority, just keep it the way it is until you can afford some good coilovers, as Olly has said. No use wasting money on springs and then buying coilovers.
 
Part in some decent adjustable coilovers,once done that play around with height adjustment you prefer :nice:
 
:nono: dont change anything unless your going to do it right
what are your plans for this car
 
thanks for the advise.... i´ll save the money and keep the suspention stock untill i can afford coilovers....... my plans is... inducktion, 4-2-1 manifold, decat, catback, cams, port and polish, hondata S300 , finaldrive, lightend flyweel, cluch etc etc....
 
You must log in or register to reply here.
Back
Top