legend calipers

[alan168]

any know know what 15" wheels will fit under legend calipers?
if 15" CE28's will fit?

 

[stevenEK9]

pretty sure legend twinpots are much the same size as stock calipers.....

 

[RagingAngel]

what offset CE28? That is more of a determining factor. The NSX caliper is slightly wider and IIRC, might require a small 2mm spacer on the stock wheel. The CE28 ought to clear even with the +45mm setup.

 

[alan168]

i have a 262 setup as i dont have an EK9 and just got some legend calipers! not sure what offset the CE28's are, how about SW388's? whats clearance on those like?

 

[RagingAngel]

you'll probably have run a 3mm spacer IIRC under the hat/bell of the rotor to properly clearance the caliper or you'll have to shave the caliper to enable proper fitment to begin with. This is independent of the wheel issue.

SW388s if you're getting them in anything that's is higher numerically than +38mm, you will need a spacer on top of the rotor bell in a 15X6.5 size....I will double check on a DelSol that has done this modification recently if I can find the owner.