ITR subframe and Rack on an ek3 B series

[qasim]

Hello People

I was wondering if the itr subframe and rack with fit on an ek3 chassis running a b series engine with ek hasport mounts. What modifications and bits will I need from an itr to successfully run this.

If anyone has done the swap please let me know!
Cheers!

 

[NicoEK4]

you Will need font lca and swaybar from the itr.

Or you can Just swap the itr steering rack pinion into the ek steering rack.

 

[EK4 Luke]

DC2 subframe is good idea as it sits engine further back

 

[Gav.]

You will need the rack, subframe, wishbones, arb and the rear l bracket from the itr/Mb6 as the ek l bracket doesn't fit

 

[qasim]

You will need the rack, subframe, wishbones, arb and the rear l bracket from the itr/Mb6 as the ek l bracket doesn't fit

Will the EK b series hasport mounts work in conjunction with the above Gav?