Integra 96 brake booster issue in ej9

Discussion in 'General Chat' started by Aiden00ej9, Jun 11, 2018.


  1. Aiden00ej9

    Aiden00ej9 New Member

    Joined:
    Jun 10, 2018
    Messages:
    4
    Likes Received:
    1
    Car(s):
    Civic ej9 facelift
    Hi guys firstly I know there are some threads I've been through already but havnt found info I need with any luck, im new here as well (first thread).. so I purchased a 96 integra brake booster and 1 inch bmc for my ej9 project but after fitting it I realised the brake booster doesn't sit in flush, I can fit fingers through the gap between it and firewall! I did enough research to think it shouldn't have any compatibility issues but I was obviously wrong, it originally had a 7/8 master cylinder and bigger diameter booster but has a longer side profile. The car is an ej9 facelift 2000 (if that helps)... if anyone can shed some light I'd really appreciate it
    Cheers
     

  2. Aiden00ej9

    Aiden00ej9 New Member

    Joined:
    Jun 10, 2018
    Messages:
    4
    Likes Received:
    1
    Car(s):
    Civic ej9 facelift
    I can get some photos later on
     
  3. Pete180

    Pete180 Lost in dreams..

    Joined:
    Apr 13, 2012
    Messages:
    1,198
    Likes Received:
    191
    Car(s):
    EM1 Coupe

Share This Page