Garrett turbo help please

[fire_king]

Hi am having a few problems trying to identify this turbo

On the Garrett Turbo it has the following

Garrett de 0143j
17200-225387
707847-1
A/R 42 M 27
A/R 64 M3

Pics

I have managed to get the measurements of compressor and turbine wheels In MM

Inlet Inducer compressor wheel

Inlet exducer compressor wheel

Exhaust inducer turbine wheel

exhaust exducer turbine wheel

Hope someone can confirm what turbo this is

Thanks in advance

 

[rs250nut]

Sounds to me like it is something off a Nissan 200sx, its a T28 for sure with a 60mm comp wheel.

 

[fire_king]

Sounds to me like it is something off a Nissan 200sx, its a T28 for sure with a 60mm comp wheel.

Thanks for the reply. So its defiantly a T28 and not a T25 then? I am also told it is a straight T3 50 trim

 

[Rich777]

post this up on honda tech along with what you want from the car

 

[rs250nut]

Thanks for the reply. So its defiantly a T28 and not a T25 then? I am also told it is a straight T3 50 trim

The compressor wheel and cover are T3 items but it has a t25 size exhaust wheel with a .64 turbine housing, this is a similar turbo as the one I used on my r5gtt only I had a .49 turbine housing to help with the lag and a bb chra.

 

[fire_king]

Anyone no if I would need to run a oil restrictor on the oil feed line? Its going on a b18c4 oil feed line will be fitted to a sandwich plate

thanks

 

[rs250nut]

Use a -3, -4 oil feed line and you should be fine. If it smokes use a restrictor it should be fine though

 

[fire_king]

pm'd