Ghettomonster
Active Member
- Joined
- Jul 23, 2018
- Messages
- 335
- Car(s)
- Honda Civic EJ9
Cheers mate something different i suppose hahaLove the choice of colour for boot !
Cheers bro its getting there bit by bitLooking much tidier
Oil pressure you can run a T piece off the oem oil pressure sensor, allowing you to wire in your gauge whilst keeping the oem oil light. OR if you plan to run even more gauges? Then an oil sandwich plate. I've got a T piece spare here
I'll see if I can find one mate, or in fact have a check on youtube! there's quite a few videos on there. The main gist of it is that it needs power, earth and the sensor wire. I ran my sensor wire off a T piece where the oem oil pressure switch is located. Ran my power wire off the fuse box or cigarette lighter, and then I attached the black ground wire to a random nut/bolt on the chassis somewhere.Thanks for that mate. Could you find me a drawing or diagram please im not quite sure when it comes to electrical bits. Or if you could simply draw a diagram for me that would be great.
Sweet mate cheers ill try tackle this over the weekend and ill let you know how i get on haha i work for a hose company so we have T peices like that in the depot so that shouldnt be s problem 1/8 NPT i think the size is from what ive read
1 of the T-piece things. Screws into the oem oil pressure switch, then you attach your gauge wire off the 1 hole, then the oem one into the 2nd hole. Or there's oil sandwich plates, which I'm sure you've probably seen before