dc brakes on ek list?

[hec]

list i have for swap.

dc knuckle
dc trailing arms
dc calipers and hoses
dc rotors
dc prop valva
si e brake cable

let me kno if anything is scitch on here.

my question is. would i also need dc master cylinder and booster?

 

[vinnY]

recommended to use a larger master cylinder and booster(15/16 or 1")
depending on which ek you have, it might be a 13/16" one

other than that I'd look at replacing the hoses

 

[s-tuned]

anybody has pics of DIY on this? i been wanting to do that to my ek

 

[mawticulous]

no pics but i actually just recently did the rear swap on my ek to disc brakes when i heated the front up to much and it didnt want to stop going downhill doin about 90. easy, easy swap

 

[mawticulous]

list i have for swap.

dc knuckle
dc trailing arms
dc calipers and hoses
dc rotors
dc prop valva
si e brake cable

let me kno if anything is scitch on here.

my question is. would i also need dc master cylinder and booster?

are you doin the front and rear conversion. i pulled my rear discs of a 96 with abs, used the teg e-brake lines and you can used the stock prop valve cuz its the same as the si. i needed a new booster cuz i had a 13/16. so i got the teg MC and i have an accord booster since the bolt pattern is the same as the teg, but if u want the si cable u can use it

 

[tama666]

my question is. would i also need dc master cylinder and booster?

dc master cylinder should go in, or why bother doing the conversion, right? I mean you are doing this for better brake performance and not just for looks, right? For me the 1" MC is a must.

 

[mawticulous]

one of the fittings is a larger size on the dc unless its just bigger on the abs mc