Progress might be alot slower from here on, just had to spend £420 on tures for the daily, and that was cheap off ebay.
Got some parts recently so that first.
Passanger side buddyclub seat rail
Jizzer LOL this is just an engine degreaser for me to clean up all the gunk in the bay and give the engine a rub down before i paint it.
Balljoint remover, this is one of the best £10 i have spent in a long time, costs more than that to feed me at KFC.
Horrible teaser picture, but got some fake fixed backs to keep me planted on the bends.
My ass is just a wee bit too big so will need to walk my pup more, or go cycling more often.
Mishimoto Thermostat because mine was broken when the donnor car ran into.the back of a L200
Also test fitted the mounts and drilled out the holes for the drivers side mount.
Removed my steering rack ready to be sent away to
@jesse888 to have the PAS deleted properly.
Next step is to get the gearbox dropped off for internals to be swapped over, rack sent away.
Then to strip down the engine bay and get rid of all traces of rust and give it a fresh lick of paint, same for the inside only it will just be the bits that need it and will paint the cage a different colour like blue or black.
Then after the paint is on i can start building everything back up and fitting the engine.