D16 inlet questions

[Polski]

Not sure if im being thick or not but need some questions answered, Its a d16z6 inlet

Right the hose that comes up through the middle of the runners where does this go?

Can i just block the coolant hoses that are meant to go to bottom of tb?

Am i meant to use the d16 fuel rail? As the fuel line will not fit as there totally differant fitments

Where does the brake booster hose go? On the top of inlet?

Jesus i sound thick as but dodo upgrades guide just aint helping me out tbh (

 

[fatboi]

when i did this for my mate i was left with one coolant line that had nowhere to go so i just plugged it and his car has ran fine for over a year now. also you need to run the hoses to the throttle body as you need to re-use the d14 tb and it uses a rotary air control valve that needs the coolant passing through to make it work.
hope this helps a bit mate

 

[fatboi]

double post..

 

[Polski]

Just found this

Im guessing both them clear hoses run to bottom of tb? That looks like the one that comes up through middle of runners

 

[Polski]

Its the fuel line thats annoying me, My fuel rail at the end dosnt have the hole through it for the banjo so if i put the banjo on and bolt on no fuel will get through

Also forgot theres a metal bracket with a black thing on it with a hose coming off at both ends i have no idea what it is, Can get a pic if itl make more sense?

 

[fatboi]

im 98% sure we jus bolted fuel line from fuel filter to the rail. cant remember if we used d16 fuel rail or d14. but we didnt modify anything just attached it back on. i do remember seeing no holes in it tho and thinking it wouldnt work....but it did, so just try it mate

 

[Polski]

Here it i the hole is at the end?

Ill give it a try tho
And heres that sensor thing on the bracket anyone know what it is?

 

[Polski]

Noone on here got a d16z6? Just need a pic of inlet, that black sensor has a hose connected to the fuel/carbon canister where does the other hose go to on the inlet?
And the iacv valve on the d16 inlet has hoses coming off the bottom where do these go?

 

[fatboi]

just loop the hose from the d16 iacv as it isnt needed...or u can take it off and make a blanking plate and seal it on. but i just looped them on mine and on my mates.
also looked at my mates one the other day for you and we used the d14 injectors with the d16 fuel rail and intake. but you must re-use the d14 tb with the d16 throttle pulley as it is side mounted and the d14 tb isnt. hope this helps and if youre still stuck ill try and get a pic of my mates next time i see him.

 

[Polski]

Yeh cheers bud helped heaps!

Gonna get it all done later just the 1 hose I'm unsure of but I'll try figure it out after work