Coolant fan not Working

[Crouchy]

I need help, my coolant fan isn't working on my turbo EK9.

The fuse is fine, the relay is fine, I've replaced the fan switch & coolant temp sensor and I've powered up the fan and it works fine.

Has anyone got a wiring diagram?
Any help is appreciated.
Thanks, Max

 

[robthedoc]

just a quick search and came up with this not sure if it's any use. I have access to autodata online if it's no good but that will only have the uk vti diagrams, probably the same? Let me know.

http://www.wiringdiagrams21.com/2010/07/12/1997-honda-civic-cooling-fan-wiring-circuit-diagram/

 

[Crouchy]

just a quick search and came up with this not sure if it's any use. I have access to autodata online if it's no good but that will only have the uk vti diagrams, probably the same? Let me know.

http://www.wiringdiagrams21.com/2010/07/12/1997-honda-civic-cooling-fan-wiring-circuit-diagram/

Autodata is useless, thanks though.

 

[jesse888]

Mine started bringing the fan on early randomly.
Was the ecu control for the fan in the end, basically the fan has two switches, on from the fan switch and the other is at the ecu.
I had to cut the ecu wire to use only the fan switch.
Obviously this doesn't help you...
The switch and ecu both drop an earth to power the fan, is your wiring from the fan switch ok? Earth point ok?