Caliper slide bolt spec?

[greygrowler]

Hi, need this bolt today really, so was going to try some local hardware/bolt specialists as Honda have to order it it which will take a few days. Does anyone know the size/spec?!


Pic of the bolt in question is attached.

Massive Thanks in advance to anyone that might know!! I have trawled the net, but to no avail.

is off a civic ek3.

 

[Darragh]

Should be a standard M8 AFAIK . The japanese use a 12mm socket head instead of the european 13mm socket head.

 

[greygrowler]

Should be a standard M8 AFAIK . The japanese use a 12mm socket head instead of the european 13mm socket head.

awesome, thanks for your help. Guess i just need the length of the bolt. below is a link toa pic, what do you reckon?

http://www.paulstravelpictures.com/...c-Front-Brake-Pads-Replacement-Guide-012.html

 

[Darragh]

20-25mm threaded length I reckon , just take the other one out of the caliper to see or bring that with you to match it

 

[Dannyboy205]

Ye its a funny little size that bolt, im not sure if the pitch was slightly smaller than a standard bolt. According to honda this is what the size is

13 PFKL616321 BOLT, FLANGE, 8X22 £3.79

1999 HONDA CIVIC 1.5ILS FRONT BRAKE - Honda Original Parts from Lings Honda v1.01

Hope this helps