Endless Horizon
New Member
- Joined
- Feb 11, 2012
- Messages
- 37
B20B Vtec motor.
This motor was built by Daz for a friend a few years ago and has been running in his Teg for a while, He has since changed to a different set up and this motor is now available.
The Spec is a Basic Motor
B20b block,
B18c4/GSR head - 10thou skim
BWR conversion kit
B18 GSR cams
ITR cam belt, water pump and oil pump.
There are no ancilaries or manifolds with this motor, so will require your own.
We are after £1000 for the motor as is, It can be put on a pallet and delivered at cost.
Or for an extra £600 we can fit and tune it (B series equipped cars only)
We also have a pair of EK9 cams removed from a customers engine who has fitted some bigger cams,
£260 posted or we can supply and fit for £400.
This motor was built by Daz for a friend a few years ago and has been running in his Teg for a while, He has since changed to a different set up and this motor is now available.
The Spec is a Basic Motor
B20b block,
B18c4/GSR head - 10thou skim
BWR conversion kit
B18 GSR cams
ITR cam belt, water pump and oil pump.
There are no ancilaries or manifolds with this motor, so will require your own.
We are after £1000 for the motor as is, It can be put on a pallet and delivered at cost.
Or for an extra £600 we can fit and tune it (B series equipped cars only)
We also have a pair of EK9 cams removed from a customers engine who has fitted some bigger cams,
£260 posted or we can supply and fit for £400.