ARP extended studs

Discussion in 'Suspension' started by Steve M, Jun 3, 2018.


  1. Steve M

    Steve M Active Member

    Joined:
    Jul 3, 2009
    Messages:
    788
    Likes Received:
    81
    Location:
    Edinburgh
    Hi guys
    Anyone running ARP extended studs? Bought some for the back of my car as I'm replacing the rear wheel bearings and fancied some for a while. But I've tried 2 manufacturers of bearings, both non genuine, and the studs don't fit, the splined section of the stud is smaller than the hole in the bearing.
    The stud part number is definitely correct and the studs also fit the bearings I've removed.

    I've got an EK4 rear brake setup and have ordered EK4 bearings.

    What bearings are folk using? Do they only work with OEM?

    Thanks
     

  2. pr0gre551ve

    pr0gre551ve New Member

    Joined:
    Sep 14, 2015
    Messages:
    18
    Likes Received:
    6
    Hey man, Koyo is the original brand for the wheel bearings on EK's. I personally never had any issues with them and they last long. Installed those extended studs without problem. If non-original don't fit over just exchange them for the HOP ones.
     

Share This Page