5 lug conversion ITR and CTR the same?


you take your old caliper to a auto parts store and you pay a fee and they give you a remanufacturered one in exchange.

Take the rust off with a wire wheel and a drill.

If you decide to go that far with removing the hub and bearing, you should have a pro do it since you need a press to remove the bearing.
 
thenphilsays said:
Can anyone confirm that 96 spec 4 lug ITR brakes calipers will fit on a 5 lug CTR setup. I just ordered a 5 lug setup from a CTR, but it does not include rotors nor calipers. What are my options to mount this on a 96 spec ITR?
Click to expand...

I think the 4 lug ITR brake calipers will not fit the 5 lug CTR setup because the 96 spec ITR has a smaller brake disc.

You can use 01 Honda CRV Calipers. I used that calipers when I removed my endless calipers. You can get it cheaper also since there is no "Type R" price tag and they're the same...

Photos:
 

Attachments

  • $5283e4f4.jpg
    $5283e4f4.jpg
    196.4 KB · Views: 504
  • $9a17bf7d.jpg
    $9a17bf7d.jpg
    143.1 KB · Views: 519
  • $dc1e84c1.jpg
    $dc1e84c1.jpg
    210.7 KB · Views: 588
Last edited:
V-t-e-c said:
teg shafts are differnt at the hub,
they have more splines then civic r
Click to expand...

That again depends on what market DC2-R you're speaking of...which is clearly stated on the first page.

JDM-R is 36mm and USDM-R is 32mm making it identical to the CTR.

:angry:
 
yup CRV 5 lugs are alot cheaper, but perform the same. it's because they are basically the same (except maybe for the brake pads? idk) :)
 
You must log in or register to reply here.
Back
Top