- Joined
- Oct 16, 2012
- Messages
- 8,917
As above,
Looks highly likely I'm going to end up with another ek9. The one I'll be buying has an s4c with 4.7fd. Do we think this gearing is too short for the above hp goal?
With a slightly raised limiter the top speed is almost unchanged. I'm worried about getting too much wheel spin from 2nd/3rd and pos 4th as these are the gears I use on most corners on track and really don't want uncontrollable wheel spin.
Torque would be roughly 175ftlbs.
Will have sticky track rubber probably 205 width.
Plate LSD aswell.
Looks highly likely I'm going to end up with another ek9. The one I'll be buying has an s4c with 4.7fd. Do we think this gearing is too short for the above hp goal?
With a slightly raised limiter the top speed is almost unchanged. I'm worried about getting too much wheel spin from 2nd/3rd and pos 4th as these are the gears I use on most corners on track and really don't want uncontrollable wheel spin.
Torque would be roughly 175ftlbs.
Will have sticky track rubber probably 205 width.
Plate LSD aswell.
Last edited: