MichaelEK9DK
Active Member
- Joined
- Jun 23, 2014
- Messages
- 259
Hi Honda'guys!
I will build a S80 4.4 gearbox into a little more fun gearbox.
I want a better drag-gear than I have so far, it is very low geared for 3 +4.
I have 8600 rpm and running with 195/50-15 small deck
One day, the engine rebuilt, and more rpm, I'll remember
I've looked at Mfactorys gear converter.
And come up with this solution:
FD 4.923
lower 1 gear 3.07
Normal 2-3-4
And a further 5 gear 0.787
Here it is held up with a 4.78 (OEM) FD:
http://www.teammfactory.com/gearcal...rratiof=0&tranny=Calculate+Transmission+1+&+2
Someone who has a good advice or constructive criticism?
Regards Michael.
I will build a S80 4.4 gearbox into a little more fun gearbox.
I want a better drag-gear than I have so far, it is very low geared for 3 +4.
I have 8600 rpm and running with 195/50-15 small deck
One day, the engine rebuilt, and more rpm, I'll remember
I've looked at Mfactorys gear converter.
And come up with this solution:
FD 4.923
lower 1 gear 3.07
Normal 2-3-4
And a further 5 gear 0.787
Here it is held up with a 4.78 (OEM) FD:
http://www.teammfactory.com/gearcal...rratiof=0&tranny=Calculate+Transmission+1+&+2
Someone who has a good advice or constructive criticism?
Regards Michael.
Last edited: